LinkBack URL
About LinkBacksodleo, it looks good. I had a friend ask me if I would make him a snail trap for the boy scouts 22 target shooting. If I ever get some thick plates or pipe, I am going to try may hand at it.
):
):
Senior Member
odleo, it looks good. I had a friend ask me if I would make him a snail trap for the boy scouts 22 target shooting. If I ever get some thick plates or pipe, I am going to try may hand at it.
"Man is the best computer we can put aboard a spacecraft ... and the only one that can be mass-produced with unskilled labor"
Apollo 11 W.V. Braun
Have ForceCut80I, Precision TIG 185, Ideal Arc 250, Oxy-Acetylene, Tig welding Chamber, 14 Ton pipe bender, 20 Ton press, Electric sheet metal shear, 12 inch- 0.125 Shear, 12 inch Metal Band Saw, Power Hack Saw, Abrasive Chop Saws, 2 Mills, 5 Lathes, and lots of other items
Senior Member
ISKI Sir what is a snail trap. I have not heard that term before. I tried to find it on line and came up to some weird sites. I am going to see if the pics from I took earlier today will show my welds any better. OK does anyone have an idea how I can clarify my pics after I download them to the post. They look OK on the camera and when I download to my comp, but they are not clear when I attach them to the post so y'all can see them
Speedway 110 Flux core welder
HF 80 amp arc welder
Lincoln tombstone
Really old and I mean old welder
Lots of clamps, grinders
And a desire to lean all I can about welding and fabrication
Oh forgot I have gotten to use an awsome Longevity multi purpose machine and sweet enigne drive thanks to SIC Fabrications
Moderator
A snail trap is usally square funnel with a bent pipe at the small end. the pipe is circled like a snail. It slows down the bullet to the point that it is collected in a tin can. Hope this helps.
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Senior Member
KHK Thanks I always called them can traps. I like snail trap better. I might have to try one of those next
Speedway 110 Flux core welder
HF 80 amp arc welder
Lincoln tombstone
Really old and I mean old welder
Lots of clamps, grinders
And a desire to lean all I can about welding and fabrication
Oh forgot I have gotten to use an awsome Longevity multi purpose machine and sweet enigne drive thanks to SIC Fabrications
Senior Member
hmmm i just might have to make one of them there snail traps
TigWeld 250
old 1950s Master Electric engine drive DC Powersource
HF 151 Mig
HF 100 FC
Victor Journeyman Oxy/Ace set up
Bunch of tools of the trade to much to list
WeldorWeb.com
Posting Permissions
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
Reply With Quote
Bookmarks