saw this and had to take a pic of it..... dang.... if i tried that, i would get pulled over and they would put me under the jail, not just in it
saw this and had to take a pic of it..... dang.... if i tried that, i would get pulled over and they would put me under the jail, not just in it
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
That is wrong on so many levels.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Yea the colors of the trailer and the truck totally clash.
Steve
Miller Dialarc 250
Lincoln Ranger250
Longevity TigWeld 200DX
dude was on the freeway like that.... notice the bent receiver hitch on the back of the truck?
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
He was on the freeway because the access road is to rough. I see clowns like that all the time and you are right if we were to try it off to jail we would go. I was driving a brand new Chevy dually pulling a new goose neck once and got pulled over so I could get a ticket for no brake away braking system. Some guys I work with told me they seen the patrolman checking my truck out while it was pulled over and I was inside talking to a boss. When I left here he came and nailed me.
Steve
Miller Dialarc 250
Lincoln Ranger250
Longevity TigWeld 200DX
new dot standards in arkansas.... if you running a 1-ton truck and put t trailer on the back capable of 12k, you must have a class A cdl now..... even though there arent any air brakes, still gotta have that class A..... they talking about extending that to 3/4 ton trucks now as well...... booooo
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
I like the custom work on the trailer. - Notice how the bottom of the box is trimmed to make it parallel to the road - nice touch. Kind of a "rat trailer".
Cheers,
Art R.
Cheers,
Art R.
Longevity LS200-PI multi-purpose cutter/welder,
Miller 180 Auto-Set MIG,
Custom 5hp compressor,
That is an accident waiting to happen!! I wonder if a insurance company would cover the losses..
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
if it came loose and hit my wife while on the road, he wouldnt have to worry about an insurance company.... there would be a lil puddle of blood n snot on the ground where dude used to stand...
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
Sicfab:
You definately have a way with words!
Art R.
Cheers,
Art R.
Longevity LS200-PI multi-purpose cutter/welder,
Miller 180 Auto-Set MIG,
Custom 5hp compressor,
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
Bookmarks