How much do you think this 76 Jeep Wagoneer is worth as a parts vehicle.
V8 motor ran. auto trans no reverse, 4x4.
Any more than the local scrap yard paying $165/Ton.
![]()
How much do you think this 76 Jeep Wagoneer is worth as a parts vehicle.
V8 motor ran. auto trans no reverse, 4x4.
Any more than the local scrap yard paying $165/Ton.
![]()
Longevity Force Cut LP-50D Plasma Cutter
Lincoln SP170T Mig Welder
Miller 330 A/B/SP Tig Welder
Miller Two Fifty Twin AC/DC Stick Welder
Oxy/Acetylene Rig
Arcair gouging torch
think someone would buy it outright for parts, those seem hard to come by and have a pretty popular following.. you might stick it on craigslist and see if you get any bites..
_____________________________
1972 Bridgeport Mill
Thermal Arc ArcMaster 185 Tig Welder
Lincoln 180c Mig Welder
Longevity ForceCut 40i
Pro-Tools 105 Tubing Bender
Buffalo Horizontal Band Saw
Craftsman Benchtop Drillpress
Craftsman Bench Grinder
Craftsman Belt/Disk Sander Combo
Crafstman Vertical Band Saw
_____________________________
I would say about $500-$700 is what i might give for it to part it out. Transmission is toast,unless you rebuild it,or scrap it.The drive train if good will bring you the most cash probably.The motor should bring if running $300-$500 i would guess,plus you have the body parts you can sell.This is just my best guess without seeing it in person.
Guy
Miller Syncrowave 250 DX
Millermatic Challenger Mig
Century 230/140 amp AC/DC Stick
DeVilbiss 6Hp 60Gal.
HF Horizontal/Vertical Bandsaw
HF 6in. Belt 9in. Disc Sander
HF pipe bender
HF tubing roller
Thanks Guys, Maybe I'll try craigslist.
Longevity Force Cut LP-50D Plasma Cutter
Lincoln SP170T Mig Welder
Miller 330 A/B/SP Tig Welder
Miller Two Fifty Twin AC/DC Stick Welder
Oxy/Acetylene Rig
Arcair gouging torch
Whoa! What's your hurry? I'm heading back out to AZ next week and then again in December -with a trailer. Maybe I can buy it from you if it doesn't sell before then? I'd love to bring that thing back from the dead.
HTP Mig 2400
HTP Microcut 625
Longevity Tigweld200
Hubangus blast cabinet
Enco Mill
O/A torch setup
PT105 Bender
Notchmaster
4X6 bandsaw
Portaband
20T press
Hey James, Not in any hurry at all, If you really want to bring it back from the dead, the wagoneer is yours. I would rather see that than to scrap it. It's yours for the hauling if you want it. PM me and I'll give you my address/phone, then you can decide if the trip would be worth it. If you need more pictures let me know.
Nicholas
Last edited by Nicholas; 11-16-2011 at 10:53 AM.
Longevity Force Cut LP-50D Plasma Cutter
Lincoln SP170T Mig Welder
Miller 330 A/B/SP Tig Welder
Miller Two Fifty Twin AC/DC Stick Welder
Oxy/Acetylene Rig
Arcair gouging torch
I'm no expert but it looks pretty good to me too. Lots of good parts on it that's for sure.
Cheers,
Art R.
Longevity LS200-PI multi-purpose cutter/welder,
Miller 180 Auto-Set MIG,
Custom 5hp compressor,
Wow really? I'll take it thanks! I want to pay/trade you something for it though. Are you ok keeping it until around Christmas time? If not I will pull the trailer down with me empty next week to haul it. I'll have more time to make that drive over Xmas though. Let me know and thanks again! I'll PM for your address.
HTP Mig 2400
HTP Microcut 625
Longevity Tigweld200
Hubangus blast cabinet
Enco Mill
O/A torch setup
PT105 Bender
Notchmaster
4X6 bandsaw
Portaband
20T press
No problem, I can keep it for you as long as you need, there is no hurry,
Longevity Force Cut LP-50D Plasma Cutter
Lincoln SP170T Mig Welder
Miller 330 A/B/SP Tig Welder
Miller Two Fifty Twin AC/DC Stick Welder
Oxy/Acetylene Rig
Arcair gouging torch
James, here are some more pics for you.
![]()
Longevity Force Cut LP-50D Plasma Cutter
Lincoln SP170T Mig Welder
Miller 330 A/B/SP Tig Welder
Miller Two Fifty Twin AC/DC Stick Welder
Oxy/Acetylene Rig
Arcair gouging torch
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
Bookmarks