):
Senior Member
for the last month or so i've been gathering parts for my plate marker. i bought the universal interface relay box from torchmate and everything else i got second hand off ebay. all in all i have less than 600 into this.i just did my first test last night. i think i can speed up the feed alot on the plate marker. more testing to come...
Last edited by Kel Fab Creations; 04-20-2011 at 11:34 PM.
Torchmate 2x4 with custom water table
Hypertherm Max 42 plasma with RT60 torch
Miller Aerowave TIG
Lincoln 216 MIG
Husky 60 gallon air compressor
Old Craftsman Lathe
http://www.kelfabcreations.com/home.html
extremly nice set up Kel
Senior Member
What spindle are you using to mark with?
Senior Member
It's a pneumatic scribe. The blows per minute is adjustable too to get different looking lines.
Torchmate 2x4 with custom water table
Hypertherm Max 42 plasma with RT60 torch
Miller Aerowave TIG
Lincoln 216 MIG
Husky 60 gallon air compressor
Old Craftsman Lathe
http://www.kelfabcreations.com/home.html
Moderator
That's a great idea!! I think that I will make one for my CNC.
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Senior Member
It really was pretty easy to put together. When i get a chance I'll put together a parts list for everyone interested.
Torchmate 2x4 with custom water table
Hypertherm Max 42 plasma with RT60 torch
Miller Aerowave TIG
Lincoln 216 MIG
Husky 60 gallon air compressor
Old Craftsman Lathe
http://www.kelfabcreations.com/home.html
Gadget (04-22-2011)
Senior Member
What is the purpose of that?
Millermatic 140
Thermodynamics 190C plasma cutter
Plasma Trace (custom built by me)
Victor O/A torch HVAC size
Craftsman 15" floor model drill press
Craftsman 6" metal lathe
Wilton horizontal band saw
Porter Cable 60 gallon compressor
Clarke parts washer
Craftsman 10" table saw
Ryobi 8 1/2" sliding miter saw
Homemade bench top english wheel
Homemade plannishing hammer
Tons of hand power tools
1500 sq ft shop
& an over active imagination
Senior Member
with this you can permanently etch part numbers, drawings, bend lines, center punches for holes to be drilled etc.Originally Posted by Charley Davidson
here's a pic and vid of some more testing/tuning from last night. i needed a stiffer return spring so i zip tied half the coils together lol. works better now but i need to find another spring. also i'll be changing the movement delay tonight.
Torchmate 2x4 with custom water table
Hypertherm Max 42 plasma with RT60 torch
Miller Aerowave TIG
Lincoln 216 MIG
Husky 60 gallon air compressor
Old Craftsman Lathe
http://www.kelfabcreations.com/home.html
Moderator
Now it makes sense, great idea.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Moderator
Great Videos!
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Posting Permissions
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks