Video of weathervane test cut.

[Gadget]

I cut the letters for the weathervane out today. Picture also has Mr. Kilroy in it.

[KHK]

Looks good Gadget. How large are the letters?

[Gadget]

4 inch letters Keith. Didn't have time to weld them to the rods.

[THECNCMAN]

Dan . I don't know how is your table 4x4 5x5? why you don't try to use ball screws? are shipper in bay.
hello> Carlos

---------- Post added at 08:41 PM ---------- Previous post was at 08:38 PM ----------

if you design the letters on cad or auto cad you don't weld nothing. I teach to you how.

[Gadget]

My table is 25"X45". I didn't use ball screws due to the cost and the limited budget. The letters will be welded to rods that will connect to the center mast. I used a CAD/CAM program to do the letters shown above.

[THECNCMAN]

Dan: You need use other kind letter to join together is simple and very easy. give a little time and I let you know what type a letter