LinkBack URL
About LinkBacksI downsized the machine path from 8" to 6" for the next pulley. I can't upload photos of the 8" now that it's done but I can embed a video of the cut process.
Dan
):
):
Moderator
I downsized the machine path from 8" to 6" for the next pulley. I can't upload photos of the 8" now that it's done but I can embed a video of the cut process.
Dan
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Senior Member
Gadget,
Now that is one cool tool. I hope to have one someday. When we are able to post pics again I'll show you what I'm planning on using for mine.
Longevity Force Cut LP-50D Plasma Cutter
Lincoln SP170T Mig Welder
Miller 330 A/B/SP Tig Welder
Miller Two Fifty Twin AC/DC Stick Welder
Oxy/Acetylene Rig
Arcair gouging torch
Moderator
Nice job Gadget!!
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Senior Member
Dan:
Nice video. I noticed the brush around the cutter. _ I'm guessing it cuts down on the dust. Is it attached to a vacuum?
Cheers,
Art R.
Longevity LS200-PI multi-purpose cutter/welder,
Miller 180 Auto-Set MIG,
Custom 5hp compressor,
Moderator
Art, the brush is connected to a vacuum. I can use it on the rough cut but on the finish cut the bit is too short and I have to take it off. Fortunately, the finish cut doesn't create too much dust.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Senior Member
Good looking CNC machine you made there,and you are definitely getting some use out of it.Great idea on using the vacuum brush to keep the dust down.
Guy
Miller Syncrowave 250 DX
Millermatic Challenger Mig
Century 230/140 amp AC/DC Stick
DeVilbiss 6Hp 60Gal.
HF Horizontal/Vertical Bandsaw
HF 6in. Belt 9in. Disc Sander
HF pipe bender
HF tubing roller
Senior Member
Man, I wish Santa would bring me a CNC really bad!!!! There is so much I could do or want to do with it. I've just been having to "poor boy" it and freehand everything up to this point and have gotten pretty good at that but it would be nice not to have to draw everything on paper, cut it out with knife/scissors, transfer to metal, and then cut and spend way too much time cleaning up my work with flap discs and die grinder. I guess it makes me appreciate each thing a little more though, having that much effort in it all.
Just Sensible Concepts
*Longevity Weldall 160PI (technically it's not mine but it is on MY inventory for my shop at work)
Lincoln Weldanpower 200
Lincoln Pro Mig 180
Lincoln AC225
Posting Permissions
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
Reply With Quote
Bookmarks