):
Senior Member
trying to finish up a Christmas present for the grandson but my welder is acting up, getting no gas at the nozzle, have 60# on the gauge. Cannot here any gas at the nozzle.
Millermatic 140
I noticed weird sound and bad welds while welding some rod last night but thought it might just be a coating on the rod but I guess not.
Millermatic 140
Thermodynamics 190C plasma cutter
Plasma Trace (custom built by me)
Victor O/A torch HVAC size
Craftsman 15" floor model drill press
Craftsman 6" metal lathe
Wilton horizontal band saw
Porter Cable 60 gallon compressor
Clarke parts washer
Craftsman 10" table saw
Ryobi 8 1/2" sliding miter saw
Homemade bench top english wheel
Homemade plannishing hammer
Tons of hand power tools
1500 sq ft shop
& an over active imagination
Moderator
My regulator just up and quit the other day. Maybe that's what happened to you. Disconnect the argon line from the flow meter to see what kind of flow you are getting, if the flow is good there you will have to trace it through the line. Hope this helps.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Senior Member
Forgot to mention that my ball on the flow meter goes up as it's supposed to when I pull the trigger
---------- Post added at 07:37 PM ---------- Previous post was at 07:26 PM ----------
Problem solved, gun had pulled loose at the connection to the welder. Thanks for your quick response though Gadget
Millermatic 140
Thermodynamics 190C plasma cutter
Plasma Trace (custom built by me)
Victor O/A torch HVAC size
Craftsman 15" floor model drill press
Craftsman 6" metal lathe
Wilton horizontal band saw
Porter Cable 60 gallon compressor
Clarke parts washer
Craftsman 10" table saw
Ryobi 8 1/2" sliding miter saw
Homemade bench top english wheel
Homemade plannishing hammer
Tons of hand power tools
1500 sq ft shop
& an over active imagination
Moderator
Glad it's working for you Charley.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Senior Member
i was gonna say to check to see if the gun is still plugged in all the way.... thats happened to me more times than i can count on both hands and 4 toes....
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
Senior Member
Gotta love those easy jee wiz fixes. Good thing u didn't start throwing parts at it yet. Were u working on the trike when this happened? That thing is sweet. Looks a little tall for a one year old though.
Torchmate 2x4 with custom water table
Hypertherm Max 42 plasma with RT60 torch
Miller Aerowave TIG
Lincoln 216 MIG
Husky 60 gallon air compressor
Old Craftsman Lathe
http://www.kelfabcreations.com/home.html
Posting Permissions
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks