LinkBack URL
About LinkBacksGot a call from my pastor, who said his old office chair needed some new screws because the seat was loose. Well after getting it and looking at it found the base had cracked.
):
):
Senior Member
Got a call from my pastor, who said his old office chair needed some new screws because the seat was loose. Well after getting it and looking at it found the base had cracked.
Speedway 110 Flux core welder
HF 80 amp arc welder
Lincoln tombstone
Really old and I mean old welder
Lots of clamps, grinders
And a desire to lean all I can about welding and fabrication
Oh forgot I have gotten to use an awsome Longevity multi purpose machine and sweet enigne drive thanks to SIC Fabrications
Senior Member
This Looks like a job for Longevity!
Thurmond
Miller Bobcat 3 Phase,
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
Miller Suitcase X-Treme 12VS
17 Series Tig Torch for Solar Powered Welding Project
EVERLAST PowerUltra 205P
Hobart Handler 187 Mig / Flux Core
Standard Oxygen / Acetylene Cutting, Welding setup.
Senior Member
After getting it cleaned up and trying to get everything lined back up. Got out the stick welder and prayed for no burn thru. I think it came out looking prety good and it back to better that before
Speedway 110 Flux core welder
HF 80 amp arc welder
Lincoln tombstone
Really old and I mean old welder
Lots of clamps, grinders
And a desire to lean all I can about welding and fabrication
Oh forgot I have gotten to use an awsome Longevity multi purpose machine and sweet enigne drive thanks to SIC Fabrications
Senior Member
Your right but unfortunatley I have not getten another mig yet. Still saving for a Mig 205. Maybe I want have to pray when I fix things.
Speedway 110 Flux core welder
HF 80 amp arc welder
Lincoln tombstone
Really old and I mean old welder
Lots of clamps, grinders
And a desire to lean all I can about welding and fabrication
Oh forgot I have gotten to use an awsome Longevity multi purpose machine and sweet enigne drive thanks to SIC Fabrications
Senior Member
Looks great! I bet it holds up better than the original metal.
Thurmond
Miller Bobcat 3 Phase,
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
Miller Suitcase X-Treme 12VS
17 Series Tig Torch for Solar Powered Welding Project
EVERLAST PowerUltra 205P
Hobart Handler 187 Mig / Flux Core
Standard Oxygen / Acetylene Cutting, Welding setup.
Member
Looks good. I recently rebuilt the swivel lock mechanism on an electric wheelchair for a gentleman in our scout troop. Chairs can see a lot of abuse.
ForceCut 50D, Lincoln SA200, Hobart Handler 135, HF 80 amp inverter, Rockwell 11x35 lathe, HF Drillmill, Northern 6x10 bandsaw, compact bender, pipe bender, 2 tractors.
Senior Member
Yes I hope it holds better my pastor is old and set in his ways. Two years ago I tried to give him a new chair it still sits in his office unused unless some stops by to visit.
---------- Post added at 09:32 PM ---------- Previous post was at 09:29 PM ----------
I nver realized how much abuse or use if you wish a chair takes day in and day out. Now if it will hold for another 12 years it willbe 24 years of use. Well maybe till the preacher finally decides to retire for good
Speedway 110 Flux core welder
HF 80 amp arc welder
Lincoln tombstone
Really old and I mean old welder
Lots of clamps, grinders
And a desire to lean all I can about welding and fabrication
Oh forgot I have gotten to use an awsome Longevity multi purpose machine and sweet enigne drive thanks to SIC Fabrications
Senior Member
no comment
TigWeld 250
old 1950s Master Electric engine drive DC Powersource
HF 151 Mig
HF 100 FC
Victor Journeyman Oxy/Ace set up
Bunch of tools of the trade to much to list
WeldorWeb.com
Senior Member
Yes you didOriginally Posted by WeldingWookie
Millermatic 140
Thermodynamics 190C plasma cutter
Plasma Trace (custom built by me)
Victor O/A torch HVAC size
Craftsman 15" floor model drill press
Craftsman 6" metal lathe
Wilton horizontal band saw
Porter Cable 60 gallon compressor
Clarke parts washer
Craftsman 10" table saw
Ryobi 8 1/2" sliding miter saw
Homemade bench top english wheel
Homemade plannishing hammer
Tons of hand power tools
1500 sq ft shop
& an over active imagination
Bluesman (05-17-2011)
Senior Member
Odleo:
Way to go. It's good to get on the right side of "a man of the cloth"!!
Cheers,
Art R.
Longevity LS200-PI multi-purpose cutter/welder,
Miller 180 Auto-Set MIG,
Custom 5hp compressor,
Posting Permissions
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
Reply With Quote
Bookmarks