):
Junior Member
Just dropped in to say hi to all and to thank Simon & Kathy for there help with my recent purchace of the forcecut 60i.
Been fabricating for years But this is my !st plasma cutter .looks like the pasma cutter will make my projects go a little easier.
Moderator
Hi Pax1ton and welcome to the forum. We like pictures here so be sure to include some showing your work. Also, check out for the contest here. The odds of winning a great new Longevity machine are very good. A new contest will be starting soon.
Dan
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Senior Member
howdy n welcome dood.... if ya have questions regarding set-up or technique or metal specific questions, please ask.... after all, the only stupid question is the one that didnt get asked, yeah?
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
Moderator
Hello and WELCOME!!
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Pax1ton Welcome to the Forum and congrats on the 60I, it is a nice machine that you purchased, post some photos of your projects
Tomsign
Junior Member
Thanks to all
I have a few projects going at the moment and will post some pics this weekend
Current Equipment-Miller 212 autoset w/Spoolmate 200 , Forcecut 60I ,Dewalt chop saw ,2 Craftsmen Drill presses & a couple of toolboxes full of things that are sure to take the skin off your knuckles !
Senior Member
Welcome! The 60i is a great machine. I love mine.
Torchmate 2x4 with custom water table
Hypertherm Max 42 plasma with RT60 torch
Miller Aerowave TIG
Lincoln 216 MIG
Husky 60 gallon air compressor
Old Craftsman Lathe
http://www.kelfabcreations.com/home.html
Junior Member
I used mine last weekend to cut some 1/2" aluminum plate,very impressed with it so far.
Current Equipment-Miller 212 autoset w/Spoolmate 200 , Forcecut 60I ,Dewalt chop saw ,2 Craftsmen Drill presses & a couple of toolboxes full of things that are sure to take the skin off your knuckles !
Senior Member
Welcome Aboard...
Enjoy your new tool, there sure a time saver...
Longevity Arcmate 160
Longevity 50i
Longevity TigWeld 200 DX
Longevity Water Cooler
Torchmate 2x2
Custom Water Table
HF 4X6 Bandsaw
Custom Built 16" Chop saw
Grizzly 14" band saw
Delta 6" vert. belt sander
Victor O/A
Craftsman 5hp, 30gal
Delta Drill Press
Senior Member
Based on the name, our you building an old 1-ton chevy by chance? Just wondering. Welcome by the way and look forward to seeing your projects.
I can't finish a project before I start a new one...an addiction to say the least
Currently own: Hobart Handler 140
Looking to purchase Longevity MIG and TIG after I get back from this deployment
Posting Permissions
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks