LinkBack URL
About LinkBacksvid says it all, peeps. proof in the pudding that parts can be interchangeable with longevity
):
):
Senior Member
vid says it all, peeps. proof in the pudding that parts can be interchangeable with longevity
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
Gadget (03-05-2011)
Moderator
Good to know!!
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Senior Member
Stan-- Not nowing much about different migs will you explain why you would change the OEM gun for the Bernard gun.
Speedway 110 Flux core welder
HF 80 amp arc welder
Lincoln tombstone
Really old and I mean old welder
Lots of clamps, grinders
And a desire to lean all I can about welding and fabrication
Oh forgot I have gotten to use an awsome Longevity multi purpose machine and sweet enigne drive thanks to SIC Fabrications
Senior Member
while the oem gins are decent, the bernards are famous for better gas coverage an alot more capable of handling the "heat" of hardcore usage, like spraying .040 solid wire
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
Junior Member
and dont forget you can rotate a bernard to just about any degree to get that mig gun and the tip I like the centerfire into any position.
wbolden
wbolden1@hotmail.com
Miller Shopmaster 300
Miller S-64 Wire Feeder
Miller Syncrowave 250 with Tig Pulse
Miller 140 with autoset
Miller Thunderbolt 250/ AC/DC
Milwalkee 12" Cold Cut Saw
Lincoln Weldanpower AC-225/DC-210/6
Darex Drill Sharpener
Victor Oxy- Aceteylene Gauges and Torches
and neumerous other toys
wbolden
wbolden1@hotmail.com
Senior Member
good to know if i ever steer away from my millermatics
TigWeld 250
old 1950s Master Electric engine drive DC Powersource
HF 151 Mig
HF 100 FC
Victor Journeyman Oxy/Ace set up
Bunch of tools of the trade to much to list
WeldorWeb.com
Member
Where did you get the gun? I tried to order one and was told they don't sell to individuals. I really need a longer lead for my work. This little 9 footer is just pissing me off!!!
Senior Member
got the gun from my welding supplier... they are kinda pricey, but i have several that are no longer in use since i am no longer using longevity.... would gladly sell one to ya... hit me up from my website (link in my signature) stan
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
Member
Oh heck, mine is already in shipping.
I found one online for a really great price.
Senior Member
you go with bernard? that machine, you should be using a bernard q-300
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
Posting Permissions
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
Reply With Quote
Bookmarks