LinkBack URL
About LinkBacksImage posting has been fixed. You can now post using the regular posting method
Dan
):
):
Moderator
Image posting has been fixed. You can now post using the regular posting method
Dan
Last edited by Gadget; 10-26-2010 at 06:35 AM.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Senior Member
If I am logged in I cannot view any post. I can see forum index but that is as far as it goes. When I go to the individual threads all I get is blank white screen. The only way I got here was to go to thread as guest, then go to post reply, then log in. After I logged in I went back and tried to view a thread and all I get is a blank white screen.
Steve
Miller Dialarc 250
Lincoln Ranger250
Longevity TigWeld 200DX
Senior Member
same for me as poodle..... hmmmmm...... me thinks it might be a conspiracy so no one gets a chance to win the new pulsing mig machine....... lmao!!! (i was joking, simon)
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
Senior Member
is it finally working???
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
Moderator
Not really. As you have noticed you can only view posts as Guest. I have let Simon know this. The developers apparently were testing as guest and thought it was working.Originally Posted by SICFabrications
We should get it working soon (I sure hope)
Dan
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Moderator
I just logged in and tested reading a thread and so far it looks like we have full function on our forum at last WOOOOOOOOO HOOOOOOOOO!!!!!!!!!! It's been a long time.
Thanks to everyone who waited around patiently.
I just tested the photo upload process (Manage Attachments) and am still getting the security token error so they haven't fixed that yet. Please use my instructions in the beginning of this thread to upload photos to your posts. It's crude but it works
I also noticed if you do a reply and select advanced reply the submit button doesn't work so just use the simple reply for now. I will report this and the photo issue to the developers.
Dan
Last edited by Gadget; 10-19-2010 at 06:29 AM.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Senior Member
testing....2.....3.... mike check
---------- Post added at 09:16 AM ---------- Previous post was at 09:15 AM ----------
wooooooooooooooooooooooooooooooooooooha!!!!!!!!!!! !!!!!!!!!!!!!!!
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
www.longevity-inc.com
this is test this test
Longevity Welding
Toll-Free Support: 1-877-LONG-INC / 1-877-566-4462
Website: www.longevity-inc.com
Welding Forum: www.freeweldingforum.com
Sales Team: sales@longevity-inc.com
Support: help@longevity-inc.com
Dealer Inquires: dealers@longevity-inc.com
Business Hours: Monday-Saturday 9AM to 5PM(Pacific Standard Time)
Check out www.longevity-racing.com to see the latest in LONGEVITY Racing Sponsored Teams!
Junior Member
This is an amazing picture.
Posting Permissions
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
Reply With Quote
Bookmarks