Weather vane images for plasma cutting

[stickomatic]

Hi Gadget, No big deal either way. Have a good one . Stickomatic

---------- Post added at 01:53 AM ---------- Previous post was at 01:35 AM ----------

Thanks Poodle, Man , you sure know your wood! You know I used to make alot of little tools like that chasing hammer out of whatever was around in the gunshop at Old Bedford Village when I was a kid in my 20's. Curly maple was everywhere as pieces sawed for gunstock blanks and I pretty much made everything from the pieces( if you know what I mean). I think that little hammer with it's maple handle may be the last remnant from those days making Bedford rifles. Stick

[Icutone2]

Thank you Dan for the weather vain pics.

[Buckcp]

Thanks for patterns link, this is such a great forum.

[phatom3092004]

Gadget you were refered to me by longevity as someone who could help me find a remote cable to .hook up my new 60d cutter to my newlly purchased computer controled table. The gent who solde me the table let the one he had go with the old cutter is sold before I got there. Could you help me?

[Gadget]

I'm headed to a doctors appointment right now but will get back to you later today. Welcome to the forum. When you get time please post a bit about yourself in the introduce yourself forum so we can get to know you.
Dan

[arandall]

Gadget - hope you took it easy on the doctor!!

Cheers,
Art R.

[Gadget]

Gadget - hope you took it easy on the doctor!!

Cheers,
Art R.

He's still in business Art.

---------- Post added at 08:53 PM ---------- Previous post was at 08:49 PM ----------

Gadget you were refered to me by longevity as someone who could help me find a remote cable to .hook up my new 60d cutter to my newlly purchased computer controled table. The gent who solde me the table let the one he had go with the old cutter is sold before I got there. Could you help me?

I need to know if you have a relay on your table controller for torch on and off. If not is there a breakout board you can hook one up to? If you have the relay all you need to do is run speaker wire to the trigger connector at the plasma cutter. It is a simple off open on closed switch on the plasma cutter. I used an extra din connector to connect where the torch trigger wire normally connects. I connected the relay wire from the controller to this.
Let me know what your setup has and we can go from there.
Dan