LinkBack URL
About LinkBacksHow many of you guys are using the roller guide for you plasma torch.
I see there on sale.
):
):
Senior Member
How many of you guys are using the roller guide for you plasma torch.
I see there on sale.
Longevity Arcmate 160
Longevity 50i
Longevity TigWeld 200 DX
Longevity Water Cooler
Torchmate 2x2
Custom Water Table
HF 4X6 Bandsaw
Custom Built 16" Chop saw
Grizzly 14" band saw
Delta 6" vert. belt sander
Victor O/A
Craftsman 5hp, 30gal
Delta Drill Press
Moderator
I use mine occasionally for longer straight cuts but mostly use my CNC table. It works well for the straight cuts and if you make a circle attachment and only use one roller it would work well for that too.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Moderator
I use my roller guide all the time.
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Senior Member
A circle cutter! I hadn't tought of that one. That's a good idea.
Weldall 200PI, Longevity Pro auto-darkening hemet, HF 120amp stick welder (retired), Quincy 60 gallon 5hp air compressor, Iron Mike power hack saw, HF 42144 3-in-1 , 20 ton press, and a screw driver but I'm not sure where I left it...
Senior Member
I use mine for most of my cuts. As Gadget said for straight cuts it works great.
"Man is the best computer we can put aboard a spacecraft ... and the only one that can be mass-produced with unskilled labor"
Apollo 11 W.V. Braun
Have ForceCut80I, Precision TIG 185, Ideal Arc 250, Oxy-Acetylene, Tig welding Chamber, 14 Ton pipe bender, 20 Ton press, Electric sheet metal shear, 12 inch- 0.125 Shear, 12 inch Metal Band Saw, Power Hack Saw, Abrasive Chop Saws, 2 Mills, 5 Lathes, and lots of other items
Moderator
Do a search for Magnet circle cutter.Originally Posted by Arcamm
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Posting Permissions
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
Reply With Quote
Bookmarks