LinkBack URL
About LinkBacksI plugged a S45 torch into a plasma cutter that had high frequency start and this was the result. Not good!!!
):
):
Moderator
I plugged a S45 torch into a plasma cutter that had high frequency start and this was the result. Not good!!!
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Senior Member
POOF!
Thurmond
Miller Bobcat 3 Phase,
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
Miller Suitcase X-Treme 12VS
17 Series Tig Torch for Solar Powered Welding Project
EVERLAST PowerUltra 205P
Hobart Handler 187 Mig / Flux Core
Standard Oxygen / Acetylene Cutting, Welding setup.
Moderator
I had a similar problem when I converted the S45 to a straight machine torch for my LP80 HF cutter. I thought it was due to my removing just a bit of the insulator to allow mounting. I caught it early though and sealed the spot with epoxy and it is now working perfectly. Apparently the insulator doesn't provide enough gap to keep the HF from jumping across.
Last edited by Gadget; 08-08-2011 at 07:26 AM.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Senior Member
Our Weldall 160 has a HF start doesn't it? I think it has a S45 torch on it. Should it have another type torch?
Just Sensible Concepts
*Longevity Weldall 160PI (technically it's not mine but it is on MY inventory for my shop at work)
Lincoln Weldanpower 200
Lincoln Pro Mig 180
Lincoln AC225
Moderator
The 160pi uses the S45 torch.Originally Posted by Bluesman
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Posting Permissions
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
Reply With Quote
Bookmarks