):
Senior Member
Here is an adapter I machined for a tig torch I bought from Ebay for fit my Tig unit. I machined a brass rod to fit the torch power/gas feed. The gas enters into the side of the adapter. And the adapter fits into a dinse connecter to connect to my tig unit.
Have fun
Tom
Moderator
Very nice, thanks for sharing.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Senior Member
I think I am having Dejavu! Hey Tom, you might as well show them the one you made for me too!
Thurmond
Last edited by Tritium; 07-26-2011 at 12:24 PM.
Miller Bobcat 3 Phase,
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
Miller Suitcase X-Treme 12VS
17 Series Tig Torch for Solar Powered Welding Project
EVERLAST PowerUltra 205P
Hobart Handler 187 Mig / Flux Core
Standard Oxygen / Acetylene Cutting, Welding setup.
Senior Member
oh tay
here is another adapter I machined for Trilium for his torch.
Senior Member
Hey Tom,welcome to the forum.I just live over the Lillian bridge about 8 to 10 miles from Pensacola.I'm over in Perdido Beach Al. I ride my bike over there almost every weekend to ride with friends.Maybe we can do a meet and greet one of these days,if your not to busy.
Guy
Miller Syncrowave 250 DX
Millermatic Challenger Mig
Century 230/140 amp AC/DC Stick
DeVilbiss 6Hp 60Gal.
HF Horizontal/Vertical Bandsaw
HF 6in. Belt 9in. Disc Sander
HF pipe bender
HF tubing roller
Senior Member
That sounds like a thing to do.
Miller Mig
Everlast Tig/plasma
metal lathe
small milling machine
2 bead rollers
small shop
ect, ect
Senior Member
I just thought you ought to show it off Tom. After all it r a Perty piece of work. The solar tig is evolving. Added a 100A shunt and Harbor Freight meter to it for current readings. Also working on High Voltage start rather than scratch and a gas control valve. If I can figure out some IGBT circuitry and simple square wave drivers I hope to make it weld aluminum too. Yes it is an ambitious project.
Thurmond
Miller Bobcat 3 Phase,
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
Miller Suitcase X-Treme 12VS
17 Series Tig Torch for Solar Powered Welding Project
EVERLAST PowerUltra 205P
Hobart Handler 187 Mig / Flux Core
Standard Oxygen / Acetylene Cutting, Welding setup.
Moderator
Looks good!!
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Posting Permissions
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks