LinkBack URL
About LinkBacksGood to hear you are busy with work. Putting those machines through the test.
):
):
Senior Member
Good to hear you are busy with work. Putting those machines through the test.
Millermatic 180 auto set
Oxy Propane
Senior Member
Stan, Thanks for teh great review. I have been looking at getting the 205 for a while now.
Speedway 110 Flux core welder
HF 80 amp arc welder
Lincoln tombstone
Really old and I mean old welder
Lots of clamps, grinders
And a desire to lean all I can about welding and fabrication
Oh forgot I have gotten to use an awsome Longevity multi purpose machine and sweet enigne drive thanks to SIC Fabrications
Senior Member
tomorrow night, i will give the write ups on the migweld 250p and the 303p along with the stick 140 and the 80i plasma..... i have tons of typin ahead of me, but today is my 1 year anniversary with my wife and i gave her the obligatory "wedgie" first thing this a.m. HA! gotta keep it light around my house, cant have anything too serious goin down or i'll lose what lil sanity i still own =))
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
Senior Member
The 'wedgie" sounds good.
Cheers,
Art R.
Longevity LS200-PI multi-purpose cutter/welder,
Miller 180 Auto-Set MIG,
Custom 5hp compressor,
Moderator
What kind of sanity did you buy Stan, I know you had to buy it because you didn't have any before. Just kidding.... sorry I just couldn't resist.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Senior Member
is all good, dan, they were runnin a special on temporary sanity at the harbor freight 10 minutes for 39.95.... i bought 2 and the first one broke when i pulled it outta the box..... just sayin
Torchmate 5 x 10 custom built CNC table
6 (each) Thermadyne 252i mig/ stick/ tig
Thermal Dynamics a-60 automated cutter
Thermal cutmaster 52 handheld cutter
'07 pro300 miller
'08 275 trailblazer miller
'99 250 trailblazer
12vs extreme suitcase feeder
2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
800 ton break
400 ton shear
MM350p
xmt 304
(do i REALLY need to keep going?)
nothing fancy, just a few hot glue guns for metal
www.sicfabrications.com
Posting Permissions
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
Reply With Quote
Bookmarks