160P welder dimesions

**KHK** · 10-20-2008, 11:00 AM

I have ordered a LS-160P welder, and i am changing an existing welding cart to fit the new welder. On the sales page it is stated that the welder is 480mm long X 210mm wide x 310mm high this equates to 480mm * .039 = 18.72in 210mm * .039 = 8.19in 310mm * .039 = 12.09in On this from someone stated that the welder is 11in wide?? Could someone tell me the dimesions of this welder? (in American measurements)
Thank you
Keith Kraft

**MAD4metal** · 10-20-2008, 12:36 PM

specs for LS 160P.... http://longevity-inc.com/product_details.php?id=29

**KHK** · 10-20-2008, 04:01 PM

Thanks MAD4metal, I already have the specs. I am questing the stated specs based in someone saying that the welder is 11 in wide. Elevin inchs wide verus 8.19 wide is quite a difference. I am aking that someone that has an 160P to measure it. Maybe my conversion from mm to in is in error

Keith

**JOEBIPLANE** · 10-20-2008, 06:23 PM

Keith,

I asked the same question and a member who HAD A LS160P advised me that it was indeed 11" wide( plus a bit more)

I felt that the specs were wrong on the web sight, just by looking at the pictures and i was proven right.

i will search for the reply that set me straight and will send another reply to this thread when I find it
joebiplane

**JOEBIPLANE** · 10-20-2008, 06:35 PM

Keith,
here are the two post that answer you question corectly from " Gadget...our local informed authority read it through and ' ye shall be saved'...

Edit postReport this postReply with quote Re:LS 160P dimensions
by JOEBIPLANE on Wed Aug 13, 2008 1:02 pm

Hey Mobile
I ordered a LS 160P last week and expect it next week sometime ( they were enroute from china) I want to shop for a cart and the dimensions on the web are listed as legnth 480mm (19" =/-.... width 210mm(8.2").... and a third dimension I asssume is height 310mm(12.2")
Looking at the picture it sure look wider than it is high and I believe there might be a mix-up in the numbers posted at the Longevity site.
If you are anyonee else with a LS 160P could verify the measurements, I would sure be beholdin' to you
thanks
joe"Life is like ice Cream..Enjoy it... or it melts away"
JOEBIPLANE

Posts: 26
Joined: Mon Mar 17, 2008 6:55 am
Location: Southern New Jersy
Private message Top
--------------------------------------------------------------------------------

Report this postReply with quote Re: Finally...
by Gadget on Wed Aug 13, 2008 6:16 pm

My 160 is 12 7/8" wide, 13" high including rubber feet, and 20" long.

Gadget

**KHK** · 10-20-2008, 09:09 PM

Thank you ALL!! I was sure there was a problem when I looked at the specks. ALL of the weling/cutting equipment has the same dimesisions. This need to be fixed!!!!

Keith