posting in the general chat room section doesnt count toward your post count does it?
posting in the general chat room section doesnt count toward your post count does it?
_____________________________
1972 Bridgeport Mill
Thermal Arc ArcMaster 185 Tig Welder
Lincoln 180c Mig Welder
Longevity ForceCut 40i
Pro-Tools 105 Tubing Bender
Buffalo Horizontal Band Saw
Craftsman Benchtop Drillpress
Craftsman Bench Grinder
Craftsman Belt/Disk Sander Combo
Crafstman Vertical Band Saw
_____________________________
The general chat room is part of the forum so posts there should count. There is also a chat window, posts there don't count as far as I know.
---------- Post added at 10:34 PM ---------- Previous post was at 10:31 PM ----------
I just tested it and my post count went up one so it's confirmed, posts in the general chat room count.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
hmm, i posted in the geaneral chat and replyed to a couple of posts, but my post count didnt go up.. i noticed it when i was posting about my heater install.
ok now that i posted this response my post count has increased... maybe i needed a page refresh or something.
_____________________________
1972 Bridgeport Mill
Thermal Arc ArcMaster 185 Tig Welder
Lincoln 180c Mig Welder
Longevity ForceCut 40i
Pro-Tools 105 Tubing Bender
Buffalo Horizontal Band Saw
Craftsman Benchtop Drillpress
Craftsman Bench Grinder
Craftsman Belt/Disk Sander Combo
Crafstman Vertical Band Saw
_____________________________
On another forum I'm on your post count does not go up when posting in General Chit Chat. I'm surprised it does here. I may have to look around the rest of the place now...
HTP Mig 2400
HTP Microcut 625
Longevity Tigweld200
Hubangus blast cabinet
Enco Mill
O/A torch setup
PT105 Bender
Notchmaster
4X6 bandsaw
Portaband
20T press
Bruce,
If your post gets amended to a previous post the count will not go up. This happens when you post twice in a short period, the BB software automatically appends the previous post within a certain time period. Not sure what the time period is though.
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Yeah it's a bummer when that happens, you just have to be aware of it while you're chasing your post quota.
LINCOLN ELECTRIC WELD PAK - 3200HD
THERMAL DYNAMICS PAK MASTER 38XL
HARRIS OXY/ACET.
i would like a chance to win the 50i
_____________________________
1972 Bridgeport Mill
Thermal Arc ArcMaster 185 Tig Welder
Lincoln 180c Mig Welder
Longevity ForceCut 40i
Pro-Tools 105 Tubing Bender
Buffalo Horizontal Band Saw
Craftsman Benchtop Drillpress
Craftsman Bench Grinder
Craftsman Belt/Disk Sander Combo
Crafstman Vertical Band Saw
_____________________________
Guy
Miller Syncrowave 250 DX
Millermatic Challenger Mig
Century 230/140 amp AC/DC Stick
DeVilbiss 6Hp 60Gal.
HF Horizontal/Vertical Bandsaw
HF 6in. Belt 9in. Disc Sander
HF pipe bender
HF tubing roller
Units owned
Longevity WeldPro LS200PI (IGBT)
Force Cut LP80 plasma cutter
Longevity auto dark welding helmet
Atlas 10x36" lathe
Craftsman 5HP 30 Gal compressor
Home made CNC router/plasma/hot wire foam cutting table powered by Longevity Force Cut LP80
Home built aluminum foundry, HF 4x6 bandsaw, O/A torch
Had that happen to me a week ago or so. I didn't notice the post count but rather that it said something like, "at such and such a time JolietJames added..."
Weird but I suppose it makes for less clutter.
---------- Post added at 04:19 PM ---------- Previous post was at 04:18 PM ----------
This is a test lol. One minute later and?
HTP Mig 2400
HTP Microcut 625
Longevity Tigweld200
Hubangus blast cabinet
Enco Mill
O/A torch setup
PT105 Bender
Notchmaster
4X6 bandsaw
Portaband
20T press
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
Bookmarks