LinkBack URL
About LinkBacksThanks mate, I was looking to do something similar in the shop. You have given me a few ideas.
Good work.
):
):
Member
Thanks mate, I was looking to do something similar in the shop. You have given me a few ideas.
Good work.
200 amp Arc Welder
Oxy Acetylene Gas Set
9" Angle grinder
Swiss Army knife
Moderator
I think that the idea is a very good one!!! Thanks for sharing.
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Senior Member
Thanks guys! I plan on making some changes and I will post later.
Dustin
LONGEVITY ForceCut LP-50D High Frequency Plasma Cutter
HF 80 Amp inverter welder
HF 4 1/2" angle grinder
HF 5 piece Ball pien hammer set
Husky Air Scout 3 gallon Compressor
Rigid Metal chop saw
RYOBI 12" Drill press
And a crap load of klien tools rockonicon
Senior Member
This is the finished table, its small but it will work for now. I put a few hooks to hang stuff off of, a bottom rack to put stuff on and the wheels to roll it around. twothumbsup
Dustin
LONGEVITY ForceCut LP-50D High Frequency Plasma Cutter
HF 80 Amp inverter welder
HF 4 1/2" angle grinder
HF 5 piece Ball pien hammer set
Husky Air Scout 3 gallon Compressor
Rigid Metal chop saw
RYOBI 12" Drill press
And a crap load of klien tools rockonicon
Senior Member
try to set it up so you can weld down hill. That will help keep it cool enough to not burn through. you really are not supposed to do that so don't let the welding inspector or the chief engineer catch you. oops I see im too late. thats quite a cute little welder you got down there. laughingicon I wonder how far I can throw it.. Just kidding you know I love that little thing.
Last edited by Freddytk421; 03-23-2010 at 02:30 PM.
watch my youtube channel http://www.youtube.com/freddytk421
Hammer
Drill
Grinder
Welder
Saw
Who could ask for anything more?GreenSmoking
Senior Member
HA........HA.........HA.....Jk I ended up welding some "L" metal? on the wheels and posting it inside the tubing then welding it to that metal it worked out great. Thanks!!
I bet I can chuck it 50 yards!! HAHAHA
Last edited by Dustendee; 03-23-2010 at 02:42 PM.
Dustin
LONGEVITY ForceCut LP-50D High Frequency Plasma Cutter
HF 80 Amp inverter welder
HF 4 1/2" angle grinder
HF 5 piece Ball pien hammer set
Husky Air Scout 3 gallon Compressor
Rigid Metal chop saw
RYOBI 12" Drill press
And a crap load of klien tools rockonicon
Senior Member
Nice! I like it. I see ya figured out the wheel issue too.
(Retired) professional firefighter. Amateur everything else I try to do...
and I do some of it with:
Longevity LP40, <------ oh yeah!
Mig: Century 80, Clarke 150EN
O/A setup with a bunch of George Goehl's brazing videos (gsegmedia.com)
Lincoln 225 tombstone
grrrrrinders, bench and ra
hf drillpress, and files! and pliers! and hammers! and and - OK, whew, got that out of my system!
Oh yeah: GO BIG RED! (Now one of the 12 members of the Big 10 cuz we left the 10 members of the Big 12)
Senior Member
Thanks strube, It took a while(im kind of a simpleton) but I made it work.......I think this will be my tig table........
Dustin
LONGEVITY ForceCut LP-50D High Frequency Plasma Cutter
HF 80 Amp inverter welder
HF 4 1/2" angle grinder
HF 5 piece Ball pien hammer set
Husky Air Scout 3 gallon Compressor
Rigid Metal chop saw
RYOBI 12" Drill press
And a crap load of klien tools rockonicon
Moderator
The finished product looks great!! It would ook better with a LONGEVITTY welder!! HA..HA..
keith
The older the Boys, the more expensive the TOYS
Previously Owned equipment;
lot's
Current equipment;
3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
2 Longevity autodarking helmets
160d MIG
WeldAll 200PI
Senior Member
Your right keith......................Next month I will be calling up Longevity to place my order, Im very excited!!
Last edited by Dustendee; 03-23-2010 at 04:00 PM.
Dustin
LONGEVITY ForceCut LP-50D High Frequency Plasma Cutter
HF 80 Amp inverter welder
HF 4 1/2" angle grinder
HF 5 piece Ball pien hammer set
Husky Air Scout 3 gallon Compressor
Rigid Metal chop saw
RYOBI 12" Drill press
And a crap load of klien tools rockonicon
 |
||||||||||
| www.longevity-inc.com | About us | Products | Rentals | Resources | Dealers | Order Status | Contact us | Help & Faqs | Site Map |
):
Reply With Quote
Bookmarks