FORCECUT 42iDual-Voltage and PFC Plasma Cutter

FORCECUT 42i

More Views

MODEL : FORCECUT 42i     PRODUCT # : 880079

product Highlights:

Dual-Voltage and PFC Plasma Cutter

Availability: In stock

Retail Price: $1,149.99

Sale Price: $1,029.99

Optional Additional Warranty:
Additional 1 Year Warranty (Parts and Labor) : $150.00
Additional 2 Year Warranty (Parts and Labor) : $280.00
You will earn 51 Points for buying this product

DOwnload PDF:

Upload images for this product

Have a Question about this Product?
1 Question | 0 Answer
Read all Q&A | Ask a Question
Answer a Question

Recommended Areas Of Use

  • Welding Repair
  • Motorsports/ Automotive
  • Contstruction/HVAC
  • Commercial maintenance
  • Fabrication/machine shops

What’s included

  • LONGEVITY 40AMP IGBT Plasma Cutter with 20ft.PLasma Torch
  • PT-60 Full Continuous Pilot Arc Plasma Cutter Torch-14ft Lead
  • Earth Clamp
  • Consumables: 3 piece tips, 3 piece electrodes 1 shield cup
  • 110/220 pigtail
Compare Products

You have no items to compare.

FORCECUT 42i

View Additional Photos


Watch The Set-up and Performance

 

20-40 Amp Cutting Range

The ForceCut® 42i only weighs 36lbs. and runs off 110/220v 1 phase voltage making this unit the most portable plasma cutters on the market for its power. The ForceCut® 42i offers quality cutting of up to .78” (20mm) and rough cuts of up to .98”(25mm)!

Digital meters

 The ForceCut 42i uses digital meters to allow customers to adjust the unit to any amperage quickly, accurately, and easily.

Built In Air Filter And Regulator

Built in gas/air filter and regulator provides air filtration of airborne particles to keep the ForceCut 42i cutting clean and efficiently.

Thermal Overload Protection

LONGEVITY has included thermal overload protection which informs the user when the duty cycle has been exceeded shutting down the unit in a safe matter until ithas been cooled to adequate temperatures to proceed cutting.

Pilot Arc Technology

With the ForceCut® 42i plasma cutter, the Pilot Arc system automatically senses loss of voltage, auto-ignites the Pilot Arc allowing for the torch head to maintain an arc when cutting.

Blowback Arc Start/ CNC Ready

The ForceCut® 42i starts the arc by creating an internal spark to ignite the plasma arc. By using air pressure to move the electrode against the nozzle, the ForceCut® 42i creates the arc without any need for high frequency. This allows for easier CNC table integration without the worry of interference.

Efficient IGBT Inverter Technology

IGBT technology has taken the welding industry to newlevels. It gives us the ability to offer smaller units that weigh less while increasing efficiency.

Input

95v-270v 50/60hz 1 phase

PFC Auto-Voltage

Severance Cut

1” @ 5” per min

Technology

IGBT Inverter Based

Duty Cycle

40% at 40amps

Pilot Arc Technology

YES

Starting Mechanism

Blowback Start

Dimensions

W: 8”x H: 15”x D:18”

Weight

47 lbs(boxed) 33.4 lbs(unit only)

 

 

 

 

 

 

 

 

 

Product Literature :
View FileFORCECUT 42i CNC Pin Layout 248.18 KB
View File42i Manual 911.05 KB
View FileForceCut 42i Specification Sheet 573.86 KB
 
Warranty

   

Three year Warranty, parts and labor. Please take a look at our terms and policy page for detailed warranty information on this unit.

LONGEVITY WELDING FORCECUT 40DFORCECUT® 40D           FORCECUT 42iFORCECUT® 42i FORCECUT 60iFORCECUT® 60i FORCECUT 80iFORCECUT® 80i PLASMAPRO 100PLASMAPRO® 100
Dual-Voltage Yes Yes with PFC technology No No No
Arc Start HF Blow Back HF HF Blow Back
Inverter Type Mosfet

Infineon IGBT

Infineon IGBT Infineon IGBT Infineon IGBT
Pilot Arc Yes Yes Yes Yes Yes
Duty Cycle  60% @ 40 A 40% @ 40 A 60% @ 60 A 60% @ 80 A 60% @ 100 A
Plasma Output (Amps) 40 A 40 A 60 A 80 A 100 A
Recommended Maximum Cut Thickness 3" Per minute @ 3/4" Steel (Severance Cut)
7" Per minute @ 1/2" Thick Steel
17" Per minute @ 3/8" Thick Steel
3" Per minute @ 1" Steel (Severance Cut)
7" Per minute @ 3/4" Thick Steel
17" Per minute @ 1/2" Thick Steel
3" Per minute @ 1.25" Steel (Severance Cut)
7" Per minute @ 1.00" Thick Steel
17" Per minute @ 1/2" Thick Steel
3" Per Minute @ 3/4" Aluminum
3" Per minute @ 1.75" Steel (Severance Cut)
7" Per minute @ 1.25" Thick Steel
17" Per minute @ 3/4" Thick Steel
3" Per Minute @ 3/4" Aluminum
3" Per minute @ 2 1/2" Steel (Severance Cut)
7" Per minute @ 1.25" Thick Steel
17" Per minute @ 3/4" Thick Steel
3" Per Minute @ 3/4" Aluminum 6500 Watts
Maximum Severance Cut 3/4" 1" 1 1/8" 1 1/2" 2 1/2"
Recommended Generator Power 5000 Watts 6500 Watts 7000 Watts 9000 Watts 10,000 Watts

 

INCLUDED

  • PT-60 Plasma Cutting Torch
  • Ground Clamp
  • 2 Tips
  • 2 Electrodes
  • 110v/220v Adapter

Accessories for this item

  1. product Highlights:

    ADAPTER FOR 110v / 220v...

    Retail Price: $28.99

    Sale Price: $24.99

  2. product Highlights:

    PTM-60 CNC TORCH...

    Retail Price: $439.99

    Sale Price: $399.99

  3. product Highlights:

    PT-60 CONSUMABLE SET...

    Retail Price: $47.99

    Sale Price: $41.99

Related Videos

Product Literature
Additional resources
Welding Resources

   

Three year Warranty, parts and labor. Please take a look at our terms and policy page for detailed warranty information on this unit.

"Butter Knife" Review by Toby
this machine is a hot butter knife cutting frozen butter. Awesome machine. would recommend buying extra scrap you will need it from all the fun you will have cutting. (Posted on Oct 18,2013)

Super portable and powerful cutter Review by Frank
This machine that I acquired two months ago helps me to do a lot of cutting job in a shop. No any complaint! It is very portable and at the same time powerful plasma cutter. I note that Longevity customer service is on the high level.
(Posted on Apr 27,2013)

Powerful portable plasma cutter Review by Andrew
I bought this plasma cutter because I often have to cut some metal parts. Its portability and dual voltage allow me to use the machine in different sites. With this cutter my cutting job turns out more accurate and clean. Pilot Arc provides longer life of consumables. (Posted on Apr 24,2013)

Questions and Answers
There are no entries.