ArcMate M200 IGBT/MIG Welders

ArcMate™ M200 160AMP Mig/Arc Welder with IGBT technology.

This welder has the portability and performance to be called a perfect MIG Welder Combo! The M200 MIG welder has an internal wire feeder that can hold up to a 10 pound spool!  This welding machine has full amperage and wire speed control! There is no other machine like this one for the price and warranty available for it! The 140 amp ARC welder attached can be used by simply connecting up your stick holder, ground clamp, and switching the machine over to arc welding with the flip of a switch! We currently sell 25 foot extension leads for the MIG torch and the Stick Holder! We also carry a Spool gun for this welder that can be purchased at a reasonable cost for MIG welding aluminum! Please look over the selection of MIG welding equipment that we carry for your specific needs for a MIG welder.

Technology:

IGBT Technology designed for commercial or industrial use.

What is Included?

• ArcMate M200 MIG Welder
• MIG Torch (10ft) (with tips)
  
• Earth/Ground Clamp
• Hose

Please take a look at the picture of all accessories.

	Recommended (Optional Accessories)
	The following are recommended accessories for your unit. Please select the checkbox to add the item(s) to your cart.
	Mig Torch 25FT Category: Accessories & Parts Purpose: Price: $219.99 Qty:
	MIG Push Rolls 2kit Category: Accessories & Parts Purpose: Price: $17.99 Qty:
	MIG Contact Tips 2kit Category: Accessories & Parts Purpose: Price: $17.99 Qty:
	Ground Clamp 25FT Category: Accessories & Parts Purpose: Price: $79.99 Qty:
	ForceCut LP-50D Category: Plasma Cutters Purpose: Price: $599.99 Qty:
	ForceCut LP-40D Category: Plasma Cutters Purpose: Price: $399.99 Qty:
	Elite Carbon Fiber Category: Welding Helmets Purpose: Price: $149.99 Qty:
	Elite Blue Category: Welding Helmets Purpose: Price: $149.99 Qty:
	Elite Black Category: Welding Helmets Purpose: Price: $149.99 Qty:

Specifications:

Operating Voltage: 220-240VAC (1) Single Phase 50/60hz
Rated Input Current: 22 Amps
Rated Input Power: 4.8Kva
No Load Voltage: 55~75v
Voltage Adjusting Range: 14±3v~23±3v
Current Output Range: 10-~160amps (MIG/MAG) and 10-140amp Arc (Stick Welder)
Suitable Wire: .6, .8 solid/flux cored wire. (will take a ten pound spool) and optional spool gun will take 3lb spool.
Duty Cycle: 160amp duty cycle is 35%
Efficiency: n » 0.85
Power Factor: .08

Warranty Information



Please take a look at our terms and policy page for detailed warranty information and our 30 day risk free trial on this unit.