WeldAll 250PI/Multi-Purpose Units

The WeldAll 250PI features a 50AMP Plasma Cutter (AC/DC) TIG/ARC Welder with PULSE Control. We offer a FREE Pilot Arc TORCH UPGRADE! Unit features Pilot Arc starting technology allowing for non contact continuous ARC starting.The Longevity WeldAll 250PI is a revolutionary unit that will allow you to cut and weld every type of metal in the industry. The unit features ACDC TIG inverter technology which allows you to weld aluminum, stainless steel, mild steel, bronze, copper, alloy, and other metals. The plasma cutter is state of the art featuring Pilot Arc Plasma starting technology, which enables a full arc without having to touch the torch on the workpiece. This machine will cut aluminum cleaner and thicker than other plasma cutters because it allows you to make your cut on AC! We recommend this unit for multiple industries such as HVAC, Heavy Fabrication, Aircraft repair, Car or Auto Repair, Industrial welding applications, Commercial Welding, Boat Repair

Technology:

IGBT Technology designed for commercial or industrial use.

What is Included?

• WeldAll 250PI PLASMA CUTTER WELDER
• S45 Pilot Arc Cutting Torch - 14ft
  
• Air Cooled TIG Welder Torch - 14ft
  
• 300 AMP Stick Holder - 14ft
  
• Earth/Ground Clamp - 14ft
  
• Built In Air Regulator and Regulator Adjustment
  
• Air/Argon Hose
• Foot Pedal - 8ft Cord
  
• Argon Regulator
• Consumables: 1 piece tips, 1 piece electrodes, 1 piece gas diffuser, 1 piece shield cups

Please take a look at the picture of all accessories.

	Recommended (Optional Accessories)
	The following are recommended accessories for your unit. Please select the checkbox to add the item(s) to your cart.
	Pilot Arc Large Consumable 30kit Category: Consumables Purpose: Price: $179.99 Qty:
	Grey Tungsten 3/32 (2.4mm) 10kit Category: Plasma Cutter and Welder Accessories Purpose: Price: $59.99 Qty:
	Grey Tungsten 1/8 (3.2mm) 10kit Category: Plasma Cutter and Welder Accessories Purpose: Price: $69.99 Qty:
	Grey Tungsten 1/16 (1.6mm) 10kit Category: Plasma Cutter and Welder Accessories Purpose: Price: $49.99 Qty:
	Elite Carbon Fiber Category: Welding Helmets Purpose: Price: $149.99 Qty:
	Elite Black Category: Welding Helmets Purpose: Price: $149.99 Qty:
	Advanced Camo Category: Welding Helmets Purpose: Price: $99.99 Qty:
	Advanced Black Category: Welding Helmets Purpose: Price: $99.99 Qty:

Specifications:

General Specifications:
Genuine Infineon IGBT based electronics
Operating Voltage: 220/230/240 VAC 50/60Hz Input
Open Circuit Voltage: 60-80V
60% Duty Cycle @ Rated Amperages
Weight: 68 lbs
Thermal Overload Protection with Large Size Cooling Fan
Size: 21.5" L x  8 3/4"W x 15.25" H (with handles )inches

20-50AMP Plasma Cutting Specifications @ 75psi:
3" Per minute @ 1  " Steel (Severance Cut )
7" Per minute @ 1" Thick Steel
17" Per minute @ 3/4" Thick Steel Minimum requirement for air compressor: (4.0 CFM)
Aluminum cut up to 1/2" on AC plasma cutting!

5-250AMP AC/DC TIG Features:
Up Slope, Down Slop Control: 0-10 Seconds
Post Flow Control: 0-25 Seconds
Base Current Control: 5-250 Amps
Peak Pulse Current Control: 5- 250 Amps
Pulse Frequency Control: .5-25 Hz
Pulse Width Control: 10%-90%
AC Frequency Control: 20-100 Hz
AC Balance Control: 30-70% (for Aluminum)

20-160AMP Stick Features:
Arc Force Controls the amperage from 20-160AMP

Pilot Arc plasma cutter starting technology allows you to start and maintain an ARC as long as the trigger is pressed. This ARC is a similar to the ARC you will see from an oxy fuel cutting torch. In addition, you are able to hook these torches up to CNC machines because contact with the workpiece and the tip of the torch is not required. Also because there the starting technology is not High Frequency, your plasma cutter does not interfere with CNC Computers. Pilot Arc torches also have longer consumable life because you can maintain a distance when starting an arc.

Warranty Information



Please take a look at our terms and policy page for detailed warranty information and our 30 day risk free trial on this unit.