TIG Runner 200 DX Package/TIG Welders

TigWeld 200DX is the newest TIG welder to join the line of LONGEVITY TIG welder/stick welder combination units! This unit features Genuine Infineon based IGBT electronics which set the standard for Inverter technology advancement! This machine comes with a 200amp AC/DC Pulse TIG welder! The machine also comes with a 190amp AC/DC stick welder built in! This machine can weld all AC or DC penetrating materials including mild steel, stainless steel, chromoly, copper, brass,aluminum, titanium and more! This TIG welder can be used at a low setting for penetrating thin sheet metal or can be used to penetrate thick 5/8 inch thick steel at a high amperage setting! This machine is water cooler compatible for use on thick material using a high heat to penetrate. For more details on the optional water cooler system available for this machine, please contact us at our toll free # 877-566-4462 for details on price and availability. LONGEVITY Cooler Is the newest TIG welding accessory introduced for the 2010 LONGEVITY TIG welding line! This system allows you to weld long beads at high amperage without causing damage to your TIG torch! This Water cooler is recommended for all LONGEVITY TIG welders rated at over 200amps. This is a must have water cooled system for all LONGEVITY TigWeld, WeldMax and WeldAll series machines! This system will be key for extended torch and tungsten life. LONGEVITY cooler comes with a built in radiator, high powered stainless steel water pump plus a 9 liter water reservoir! Water cooler Comes with easy set up connections so that you can plug and unplug your LONGEVITY TIG torch to the water cooler with ease!

IGBT TECHNOLOGY

(1) Main Unit TIG Torch (14ft.) Stick Holder (10ft.) Earth Clamp(10ft.) Foot Pedal (that is able to adjust the amperage) Gas Inlet Pipe Argon Regulator (1)-9 LITER WATER COOLER (1)-HEAVY DUTY WELDING CART

AC TIG Input Voltage: 1 Phase 220v/230v/240 ; 50/60Hz No-Load Voltage: 70v Base Current Adjusting Range: 20-200A AC Balance: 10%-90% AC Square Wave Frequency: 50-250Hz Rated Duty Cycle: 60% DC TIG Pulse Current Adjusting Range: 5-200A Rated Duty Cycle: 60% Current Down-Slope Time: 0-10S Base Current: 5-200A Pulse Width Ratio: 0.1-0.9 Pulse Frequency: 0.2-300Hz After Flow Time: 1-25S Arc Starting Mode: High Frequency Arc Striking DC MMA No-Load Voltage: 70V Base Current Adjusting Range: 5-160A Rated Output Current: 160A Rated Duty Cycle: 60% Efficiency: >83% Mass: 25kg Dimensions: 26"x10"x15" Operating Voltage: 220V Single-phase input at 50 or 60 Hz. Features: High powered stainless steel, corrosion free water pump Quick fill and drain 9 liter water reservoir Big front mounted radiator 200mm large rear mounted fan to support cooling system 1 liter per minute cooling capacity! No water leakage guarantee!

Warranty Information Please take a look at our terms and policy page for detailed warranty information on this unit.