ArcMate LW-200ACDC/Arc Welders

ArcMate™ Series Multi-Purpose Welder with Arc(Stick) and TIG (AC/DC) Pulse (will weld aluminum) This machine is perfect for every kind of weld that needs to be performed. This machine comes with a high grade foot pedal for your variable amperage control. We are including a free argon regulator with this package deal. These 2 components alone are more than a 200.00 value! This TIG and STICK welder is completely adjustable to suit your specific welding application. We recommend that you use 2% ceriated Tungsten rods for this TIG welder. These rods are capable of being used for not only AC, but DC welding as well. Universal tungsten's will be ideal for a Universal welder like this welding machine. Please check out the specifications listed here for more general information on this welding combo machine.

Technology:

Mosfet Technology with Toshiba Mosfets

What is Included?

• Main Unit
• TIG Torch
• Stick Holder
  
• Earth Clamp
• Foot Pedal for TIG
• Argon Regulator
• Consumables: Electrodes, Clamps, and Colets (Tungstens are not included)

	Recommended (Optional Accessories)
	The following are recommended accessories for your unit. Please select the checkbox to add the item(s) to your cart.
	USA Flag Category: Welding Helmets Purpose: Price: $129.99 Qty:
	TIG Torch 25FT Category: Accessories & Parts Purpose: Price: $199.99 Qty:
	Starter Blue Category: Welding Helmets Purpose: Price: $59.99 Qty:
	Ground Clamp 25FT Category: Accessories & Parts Purpose: Price: $79.99 Qty:
	Grey Tungsten 3/32 (2.4mm) 10kit Category: Plasma Cutter and Welder Accessories Purpose: Price: $54.99 Qty:
	Grey Tungsten 1/8 (3.2mm) 10kit Category: Plasma Cutter and Welder Accessories Purpose: Price: $69.99 Qty:
	Grey Tungsten 1/16 (1.6mm) 10kit Category: Plasma Cutter and Welder Accessories Purpose: Price: $49.99 Qty:

Specifications:

1) Input voltage: 220 - 240V, 60Hz
2) MMA/Arc:
a) No-load voltage: 60 - 80V
b) Base current range: 5 - 160A
c) Rated output current: 160A
d) Duty cycle: 35%
3) AC Tig pulsing
a) No-load voltage: 60 - 80V
b) Base current range: 10 - 200A
c) SP%: 0.1-0.9
d) AC square wave frequency: 60 Hz
e) Duty cycle: 60%
4) DC TIG and pulsing TIG
a) Pulse current range: 5 - 200A
b) Duty cycle: 60% at 200A
c) Current up-slope time: 0-10s
d) Current down-slope time: 0-10s
e) Base current range: 5-200A
f) Pulse width ratio: 0.1-0.9
g) Pulse frequency:0.5-25Hz
h) After flow time: 1-25s
i) ARC striking mode: contacting and high frequency as striking
5) Efficiency: >= 83%
6) Protection class of insulation: IP21
7) Net weight: 50 lbs
8) Exterior dimensions of package: 22'x11'x17'

Warranty Information



Please take a look at our terms and policy page for detailed warranty information on this unit.