ArcMate LW-200ACDC/Stick Welders

ArcMate™ Series Multi-Purpose Welder with Arc(Stick) and TIG (AC/DC) Pulse (will weld aluminum) This machine is perfect for every kind of weld that needs to be performed. This machine comes with a high grade foot pedal for your variable amperage control. We are including a free argon regulator with this package deal. These 2 components alone are more than a 200.00 value! This TIG and STICK welder is completely adjustable to suit your specific welding application. We recommend that you use 2% ceriated Tungsten rods for this TIG welder. These rods are capable of being used for not only AC, but DC welding as well. Universal tungsten's will be ideal for a Universal welder like this welding machine. Please check out the specifications listed here for more general information on this welding combo machine.

Technology:

Mosfet Technology with Toshiba Mosfets

What is Included?

• Main Unit
• TIG Torch
• Stick Holder
  
• Earth Clamp
• Foot Pedal for TIG
• Argon Regulator
• Consumables: Electrodes, Clamps, and Colets (Tungstens are not included)

	Recommended (Optional Accessories)
	The following are recommended accessories for your unit. Please select the checkbox to add the item(s) to your cart.
	WP-26 TIG Torch 25FT Category: Accessories and Parts Purpose: Price: $199.99 Qty:
	USA Flag Category: Welding Helmets Purpose: Price: $129.99 Qty:
	Starter Blue Category: Welding Helmets Purpose: Price: $59.99 Qty:
	Ground Clamp 25FT Category: Accessories and Parts Purpose: Price: $79.99 Qty:
	Ceriated 2% Grey 3/32 (2.4mm) 10kit Category: Plasma Cutter and Welder Accessories Purpose: Price: $54.99 Qty:
	Ceriated 2% Grey 1/8 (3.2mm) 10kit Category: Plasma Cutter and Welder Accessories Purpose: Price: $69.99 Qty:
	Ceriated 2% Grey 1/16 x 7 (1.6mm) 10kit Category: Plasma Cutter and Welder Accessories Purpose: Price: $49.99 Qty:

Specifications:

1) Input voltage: 220 - 240V, 60Hz
2) MMA/Arc:
a) No-load voltage: 60 - 80V
b) Base current range: 5 - 160A
c) Rated output current: 160A
d) Duty cycle: 35%
3) AC Tig pulsing
a) No-load voltage: 60 - 80V
b) Base current range: 10 - 200A
c) SP%: 0.1-0.9
d) AC square wave frequency: 60 Hz
e) Duty cycle: 60%
4) DC TIG and pulsing TIG
a) Pulse current range: 5 - 200A
b) Duty cycle: 60% at 200A
c) Current up-slope time: 0-10s
d) Current down-slope time: 0-10s
e) Base current range: 5-200A
f) Pulse width ratio: 0.1-0.9
g) Pulse frequency:0.5-25Hz
h) After flow time: 1-25s
i) ARC striking mode: contacting and high frequency as striking
5) Efficiency: >= 83%
6) Protection class of insulation: IP21
7) Net weight: 50 lbs
8) Exterior dimensions of package: 22'x11'x17'

Warranty Information



Please take a look at our terms and policy page for detailed warranty information on this unit.