FORCECUT 42i + TIGWELD 200 SX COMBO

  • Model : 029882160268
  • Product # : 880427
$1,999.99 $2,037.41

FORCECUT 42i + TIGWELD 200 SX COMBO

  • Availability
  • In Stock
  • Features and Benefits
  • Specifications
  • What's Included
  • Videos
  • Recommended Accessories
  • Warranty

FORCECUT® 42i

 

20-40 Amp Cutting Range

The ForceCut® 42i only weighs 36lbs. and runs off 110/220v 1 phase voltage making this unit the most portable plasma cutters on the market for its power. The ForceCut® 42i offers quality cutting of up to .78” (20mm) and rough cuts of up to .98”(25mm)!

Digital meters

 The ForceCut 42i uses digital meters to allow customers to adjust the unit to any amperage quickly, accurately, and easily.

Built In Air Filter And Regulator

Built in gas/air filter and regulator provides air filtration of airborne particles to keep the ForceCut 42i cutting clean and efficiently.


 

Thermal Overload Protection

LONGEVITY has included thermal overload protection which informs the user when the duty cycle has been exceeded shutting down the unit in a safe matter until ithas been cooled to adequate temperatures to proceed cutting.

 

Pilot Arc Technology

With the ForceCut® 42i plasma cutter, the Pilot Arc system automatically senses loss of voltage, auto-ignites the Pilot Arc allowing for the torch head to maintain an arc when cutting.

 

Blowback Arc Start/ CNC Ready

The ForceCut® 42i starts the arc by creating an internal spark to ignite the plasma arc. By using air pressure to move the electrode against the nozzle, the ForceCut® 42i creates the arc without any need for high frequency. This allows for easier CNC table integration without the worry of interference.

 

Efficient IGBT Inverter Technology

 

IGBT technology has taken the welding industry to newlevels. It gives us the ability to offer smaller units that weigh less while increasing efficiency.

TIGWELD® 200 SX

 

AC/DC Welding Capabilities

This compact, dual-voltage voltage, versatile unit offers the
user a simple array of controls to accurately set the welder to perform under a wide variety of situations including fine aluminum welding. The TIGWELD™ 200 SX allows the welder to easily switch from 220v to 110v with the adapter plug that is included while being able to produce 200 amps on both AC and DC TIG and 140 amps on Stick.

Simple TIG Welding

 LONGEVITY has produced a user friendly AC/DC TIG
welder for convenience of the user. With the simplicity of
the TIGWELD™ 200 SX, the user is able to set the amps, pre-flow, post, flow, and clearance to dial in for a perfect aluminum or steel weld.

Efficient IGBT Inverter Technology

Inverter technology emphasizes portability, yet the
efficiency and reliability of the Soft Switching IGBT
components allows for the ultimate welding experience

 

Easy Dial Setup

The TIGWELD™ 200 SX is very user friendly! All the adjustments are properly spaced and coded which allows for easy on-the-fly adjustments. You can even adjust on the fly, while welding.

Stick Welder

With the flip of a switch, you are able to use the TIGWELD™ 200 SX as a stick welder on either 110v or 220v power.The Stick welder has a respectable output of 160amp oneither 110v or 220v..

High Frequency TIG Start

The TIGWELD™ 200 SX is easy to use because it uses High Frequency to strike the arc. This allows you to never have to scratch start for arc. This method keeps your tungsten contamination free, and allows for a cleaner weld.

Panel or Foot Pedal Operation

The LONGEVITY TIGWELD™ 200 SX allows excellent
control whether you are using a foot pedal or the panel.
The foot pedal will allow you to set an amperage limit as well as variably adjust the amps.

 

Thermal Overload Protection

If you are welding for a long period of time and your duty
cycle limit is reached, LONGEVITY’s thermal overload
protection will kick on safely shutting down your
machine for proper cooling avoiding any damage. Once it cools, you will be able to weld again!


 




 

 FORCECUT® 42i

 

Input

95v-270v 50/60hz 1 phase

PFC Auto-Voltage

Severance Cut

1” @ 5” per min

Technology

IGBT Inverter Based

Duty Cycle

25% at 40amps

Pilot Arc Technology

YES

Starting Mechanism

Blowback Start

Dimensions

W: 8”x H: 15”x D:18”

Weight

36 lbs

 

 TIGWELD® 200 SX

 

Input

110v/220v 50/60hz 1 phase

AC/DC Function

YES

Technology

Inverter Based

Duty Cycle

60% at 200amps

Stick Welding Capable

YES (6010 rod capable)

Starting Mechanism

High Frequency

Dimensions

W: 11” x H: 25” x D:22”

Weight

41lbs

 

  • FORCECUT 42I And All Included Items
  • TIGWELD 200 SX And All Included Items
  • WELDING CART
  • Tig
  • Mig
  • Stick
  • Multiprocess
  • Plasma
  • CNC
  • Consumables
  • Welding Armor
  • General
  • Setup
  • Welding Repair
  • Motorsports/ Automotive
  • Contstruction/HVAC
  • Commercial maintenance
  • Fabrication/machine shops
  • Shipyard/pipeline industry

   

Three year Warranty, parts and labor. Please take a look at our terms and policy page for detailed warranty information on this unit.