110/220V 200AMP TIG / 180AMP STICK Welder
The Longevity TIGWELD 200D is yet another excellent option for welders from Longevity. The TIGWELD 200D is an exceptional welding machine when it comes to superior welds on steel, stainless steel, chromoly, copper, brass and more! The TIGWELD 200D can be used at a low setting of just 5 amps for penetrating thin sheet metal or at higher amperage settings can penetrate 1/2 thick steel.
Longevity TIGWELD 200D - 110/220V 200AMP TIG / 180AMP STICK Welder
Introduction
The Longevity TIGWELD 200D is yet another excellent option for welders from Longevity. The TIGWELD 200D is an exceptional machine when it comes to superior welds on steel, stainless steel, chromoly, copper, brass and more! The TIGWELD 200D can be used at a low setting of just 5 amps for penetrating thin sheet metal or at higher amperage settings can penetrate 1/2 thick steel.
Longevity has included innovative Inverter technology which makes the unit more lightweight and reliable. The TIGWELD 200D is also capable of using a water cooler to cool the torch when welding all day. This unit also offers exceptional performance when stick welding which makes the TIGWELD 200D a versatile unit that is lightweight and portable at the same time!
Efficient Inverter Technology
With inverter technology, Longevity has once again revolutionized the industry by producing a portable, yet powerful machine that can be operated with a generator, perfect for the ON-THE-GO welding. Inverter technology emphasizes portability, yet the efficiency and reliability of the Soft Switching components allow for the ultimate welding experience.
Simple TIG Welding
Longevity has produced a user-friendly DC TIG welder for the convenience of the user. With the simplicity of the TIGWELD 200D, the user is able to set the amps and post, flow to dial in for a perfect steel weld.
Panel Control
The control panel gives the operator the power to change the welding parameters at his fingertips. Longevity understands that the foot pedal may be inconvenient to use sometimes which is why it allows the user to control welding parameters with its easy to use control panel.
Noteworthy Duty Cycle
With a 60% duty cycle, the TIGWELD 200D is perfect for light industrial applications and for welders whose primary concern is portability and efficiency!
Foot Pedal Operation
The Longevity TIGWELD 200D allows excellent control whether you are using a foot pedal or the panel. The panel is included with the TIGWELD 200D a no extra charge!
Thermal Overload Protection
If you are welding for a long period of time and your duty cycle limit is reached, Longevity's thermal overload protection will kick on safely shutting down your machine for proper cooling avoiding any damage. Once it cools, you will be able to weld again!
Digital Amp Meter
Using digital meters helps the user set amperage quickly while stick welding or TIG welding. The unit is clearly visible to the welder and by using a digital meter; you can set your favorite setting again and again!
Timed Post Flow
The TIGWELD 200D gives you the option of shielding your weld for either 2 or 5 seconds after you finish your weld, ensuring quality welds through the entire duration of any job.
Stick Welder
With the flip of a switch, you are able to use the TIGWELD 200D as a stick welder on either 110v or 220v power. The Stick welder has a respectable output of 180amp on 220v.
| Specifications |
|
||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| What's Included | • Main Unit with WP-26 10ft TIG TorchStick Holder |
||||||||||||||||
| Product # | 880366 | ||||||||||||||||
| Warranty | One year Warranty on parts and labor. Please see Longevity Terms and Conditions for detailed warranty information. |
-
TIGWELD 200DOverall Quality100%I bought this perfect machine for light industrial application. It is very convenient and simple TIG welder with easy control of welds. I was attracted by its portability and efficiency. Besides, I can easily switch the machine in to STICK welder mode with dual voltage capabilities.
Review by Brian
Posted on
-
TIGWELD 200DOverall Quality100%I am satisfied with using this machine I bought recently from this site. It enabled me to do a lot of materials in clean work conditions. I value its capability to provide precise welding. I have no any complaints to LONGEVITY concerning delivery terms and conditions.
Review by Dan
Posted on
Tig
-
TIGWELD 250EX PART 2-TIG
-
TIGWELD 250EX PART 1-STICK
-
OVERHEAD TIG WELDING TECHNIQUES
-
LONGEVITY TIGWELD 200i - 200 AMP DC TIG STICK WELDER REVIEW AND SETUP
-
Longevity Tigweld 200D-Setup & Review (200 AMP DC Tigwelder)
-
Longevity TIGWeld 200SX Review | TIG Time
-
Lincoln Invertec V205-T Vs. Longevity Tigweld 200EX
-
DiResta The Which Blade
-
HOW TO MAKE A COMPRESSOR MANIFOLD
-
TIGWeld 200sx From Longevity - Unboxing - Setup - Overview
-
TIG WELDING COPPER TIPS AND TRICKS
-
Tig Tungsten Diameters Explained
-
temper plate project video tigweld 200i
-
LONGEVITY TIGWELD 200D SETUP AND REVIEW - 200 AMP DC TIG WELDER
-
MAKING A CUSTOM METAL LAMP SHADE BY WELDING WITH A TIG WELDER - PART 1
-
LONGEVITY TIGWELD 200EX STICK ARC WELDING 316L STAINLESS TEE JOINT - WELDING TIPS
-
HOBART EZ TIG 165I vs LONGEVITY TIGWELD 200SX HEAD TO HEAD MACHINE CONTROLS COMPARISON REVIEW PART 1
-
HOBART EZ TIG 165i VS LONGEVITY 200EX COMPARISON REVIEW
-
ALUMINUM TEE MULTIPASS USING PULSE TIG WELDING - TIPS AND TRICKS
-
ALUMINUM TIG CORNER JOINT FILLET WELDING FINISHING WELDS TECHNIQUE TIPS AND TRICKS
-
TIG PULSE WELDING RATE SETTINGS ON ALUMINUM 6061-T6 USING THE LONGEVITY TIGWELD 200 EX
-
GTAW TIG WELDING ALUMINUM FULL PENETRATION BUTT WELD WELDER TIPS AND TRICKS
-
TIG WELDING CARBON STEEL MULTIPASS FILLET WELDS WITH TIGWELD 200 EX
-
CK WORLDWIDE CLEAR GAS SAVER PYREX CUP LENSE ON LONGEVITY 200SX WP-26 TIG TORCH SETUP REVIEW PART 1
-
TIGWELD 200 DX
-
MICROTIG 200 DIGITAL
-
TIGWELD 200 SX SET-UP
-
TIGWELD 160 SX SET-UP
-
TIGWELD 200 EX SET UP
Mig
-
LONGEVITY SPOOL GUN 140 SETUP AND REVIEW
-
LONGEVITY MIGWELD 200S 200AMP 60% DUTY CYCLE MIG STICK/ARC WELDER SETUP REVIEW
-
LONGEVITY MIGWELD 250 MP - PULSE ON PULSE MIG WELDER REVIEW AND SETUP
-
CUSTOM GAS CYLINDER MOUNTING BRACKET PART 2 of 2
-
INTRO TO MIG WELDING TIPS AND TRICKS
-
LONGEVITY MIGWELD 200S 200AMP 60% DUTY CYCLE MIG STICK/ARC WELDER SETUP REVIEW
-
MIG WELDING WITH AND WITHOUT GAS
-
Longevity Force Cut 40D, Migweld 140, M1 Cart Tool Review -EricTheCarGuy
-
LONGEVITY MIGWELD 250 MP - PULSE ON PULSE MIG WELDER REVIEW AND SETUP
-
MIG Welding Basics: Quick & Easy Trailer Ramp Project
-
MIGWELD 200 S STICK DEMO
-
ARCMATE 160D SET-UP
-
MIGWELD 250p
-
MIGWELD 140 VS. HOBART HANDLER PART 2
-
MIGWELD 140 VS. HOBART HANDLER PART 1
Stick
-
LONGEVITY Stickweld 140 140AMP Dual Voltage Portable Stick Welder by Longevity
-
LONGEVITY STICKWELD 140 STL - 140 AMP STICK - TIG WELDER SETUP AND REVIEW
-
LONGEVITY STICKWELD 140 STL - 140 AMP STICK - TIG WELDER SETUP AND REVIEW
-
STICK WELDING BASICS - ARC WELDING EXPLAINED
-
316L STAINLESS STEEL STICK CARBON STEEL OVERLAY WITH STICK ARC WELDER
-
STICK WELDING 316L STAINLESS STEEL WELDING OUTSIDE CORNER JOINT USING LONGEVITY WELDER
-
Stick Welding Cast Iron to Steel [Custom Clamp Mini-Build]
-
Stick Electrode Caddy TIG Project (Scrap Metal Mini-Build)
-
STICKWELD 250 SET-UP
-
STICKWELD 140 SET UP
Multiprocess
-
MOTORIZED WELDING TURNTABLE - PART 5
-
WELDING TURNTABLE PART 4
-
Longevity Innovator 255i Setup and Review Part 4 Plasma Cutting
-
Longevity Innovator 255i Setup and Review Part 4 Plasma Cutting
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 3 - AC ALUMINUM TIG WELDING
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 2 - TIG WELDING
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY PROMTS 200i MIG TIG STICK 3 IN 1 WELDER SETUP TIPS TRICKS REVIEW
-
LONGEVITY PROMTS 252i 250 AMP MIG - TIG - STICK WELDER 3 in 1 SETUP and REVIEW
-
LONGEVITY PROMTS 200i MIG TIG STICK 3 IN 1 WELDER SETUP TIPS TRICKS REVIEW
-
STICK WELDING WITH THE LONGEVITY MIGWELD 250 MP PULSE ON PULSE MIG AND STICK WELDER
-
PLASMA CUTTING BASICS TIPS AND TRICKS
-
STICK WELDING BASICS- ARC WELDING EXPLAINED
-
WELDMAX 185i 3 in 1 PLASMA, TIG, STICK SETUP REVIEW TIPS AND TRICKS
-
INNOVATOR 255i SETUP REVIEW AND DEMO TIPS AND TRICKS
-
WELDMAX 164i SET-UP
-
PROMTS 200 SET-UP
Plasma
-
FORCECUT 62i Setup and Review
-
LONGEVITY FORCECUT 62i VS THERMAL DYNAMICS CUTMASTER 52 REVIEW PART 2
-
LONGEVITY FORCECUT 62i PLASMA CUTTER SETUP AND REVIEW
-
FORCECUT 40D
-
Longevity ForceCut 42i Review | TIG Time
-
FORCECUT 40D SET-UP
-
FORCECUT 80i PRACTICAL USE
-
FORCECUT 80i SET-UP
-
FORCECUT 40i SET-UP
-
FORCECUT 42i PLASMA CUTTING IN 110V
-
MIGWELD 140 SETUP
-
FORCECUT 42i
Consumables
General
No Videos
Setup
-
TIGWELD 250EX PART 2-TIG
-
TIGWELD 250EX PART 1-STICK
-
OVERHEAD TIG WELDING TECHNIQUES
-
LONGEVITY TIGWELD 200i - 200 AMP DC TIG STICK WELDER REVIEW AND SETUP
-
Longevity Tigweld 200D-Setup & Review (200 AMP DC Tigwelder)
-
Longevity TIGWeld 200SX Review | TIG Time
-
Lincoln Invertec V205-T Vs. Longevity Tigweld 200EX
-
DiResta The Which Blade
-
HOW TO MAKE A COMPRESSOR MANIFOLD
-
TIGWeld 200sx From Longevity - Unboxing - Setup - Overview
-
TIG WELDING COPPER TIPS AND TRICKS
-
Tig Tungsten Diameters Explained
-
temper plate project video tigweld 200i
-
LONGEVITY TIGWELD 200D SETUP AND REVIEW - 200 AMP DC TIG WELDER
-
MAKING A CUSTOM METAL LAMP SHADE BY WELDING WITH A TIG WELDER - PART 1
-
LONGEVITY TIGWELD 200EX STICK ARC WELDING 316L STAINLESS TEE JOINT - WELDING TIPS
-
HOBART EZ TIG 165i VS LONGEVITY 200EX COMPARISON REVIEW
-
ALUMINUM TEE MULTIPASS USING PULSE TIG WELDING - TIPS AND TRICKS
-
ALUMINUM TIG CORNER JOINT FILLET WELDING FINISHING WELDS TECHNIQUE TIPS AND TRICKS
-
TIG PULSE WELDING RATE SETTINGS ON ALUMINUM 6061-T6 USING THE LONGEVITY TIGWELD 200 EX
-
GTAW TIG WELDING ALUMINUM FULL PENETRATION BUTT WELD WELDER TIPS AND TRICKS
-
TIG WELDING CARBON STEEL MULTIPASS FILLET WELDS WITH TIGWELD 200 EX
-
CK WORLDWIDE CLEAR GAS SAVER PYREX CUP LENSE ON LONGEVITY 200SX WP-26 TIG TORCH SETUP REVIEW PART 1
-
MICROTIG 200 DIGITAL
-
TIGWELD 200 SX SET-UP
-
TIGWELD 160 SX SET-UP
-
TIGWELD 200 EX SET UP
-
TIGWELD 210SXSale Price $829.99 Regular Price $1,019.99 -
TIGWELD 200SXSale Price $849.99 Regular Price $1,019.99 -
TIGWELD 210DXSale Price $1,099.99 Regular Price $1,379.99 -
TIGWELD 250EXSale Price $1,749.99 Regular Price $2,159.99 -
TIGWELD 280DXSale Price $2,099.99 Regular Price $2,639.99 -
TIGWELD 315Sale Price $1,649.99 Regular Price $1,714.99