140 Amp 110V/220V 60% Duty Cycle STICK Welder
The Longevity STICKWELD 140 is an excellent portable, yet powerful stick welder that is capable of welding on both 110v and 220v welding current. This featherweight stick welder weighs in at 23 lbs and ranges in amperage from 30-140 when connected to a 220v outlet.
Longevity STICKWELD 140 - 140 Amp 110V/220V 60% Duty Cycle STICK Welder
Introduction
The Longevity STICKWELD 140 is an excellent portable, yet powerful stick welder that is capable of welding on both 110v and 220v welding current. This featherweight stick welder weighs in at 23 lbs and ranges in amperage from 30-140 when connected to a 220v outlet.
Thermal Overload Protection
Longevity has included thermal overload protection which informs the user when the duty cycle has been exceeded shutting down the unit in a safe matter until it has been cooled to adequate temperatures to proceed to cut.
Ultra Portable
Weighing in at 23 lbs, the STICKWELD 140 is a featherweight in the welding industry allowing you to weld pretty much anywhere. The handle is very convenient when you are up on ladders, in small places or welding on the move.
Efficient Inverter Technology
With inverter technology, Longevity has once again revolutionized the industry by producing a portable, yet powerful machine that can be operated with a generator, perfect for the ON-THE-GO welding. Inverter technology emphasizes portability, yet the efficiency and reliability of the Soft Switching components allow for the ultimate welding experience.
Digital Meter Display
The STICKWELD 140 features digital meters displaying your amperage to allow customers to adjust the unit to any amperage quickly, accurately, and easily.
Easy Voltage Switch Over
With the STICKWELD 140, you are able to easily switch over from either 220v or 110v. With our newer model design, simply plug the 110v attachment to the existing power cord and weld away anywhere, anytime.
Stick Holder and Stick Electrodes
The Longevity STICKWELD 140 features an industrial stick holder rated at 300 amps. Equipped with a strong spring for clamping the electrode rods perfectly every time and capable of hold rods up to 1/8” thick and will weld with your most common electrodes.
Variable Amp Adjustment
The Longevity STICKWELD 140 offers variable amps adjustment and not presets on allowing users to pinpoint the correct setting while welding every time. In conjunction with the digital display, you are able to accurately set your machine.
Duty Cycle
The STICKWELD 140 features an industry competitive duty cycle of 60% at 40 degrees Celsius. This duty cycle will allow your machine to run hotter than most brands while you work for longer periods of time.
| Specifications |
|
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| What's Included | • 300 Amp Stinger |
||||||||||||
| Product # | 880306 | ||||||||||||
| Warranty | One year Warranty on parts and labor. Please see Longevity Terms and Conditions for detailed warranty information. |
-
STICKWELD 140 STICK WelderOverall Quality100%great quality welder for its price and the customer support is absolutely superb..............will buy from them again!..thanx
Review by pitbullTm
Posted on
-
STICKWELD 140 STICK WelderOverall Quality100%I like this welder due to its small size and powerful capabilities. It is a perfect thing to use for welding works at home. It is easy to move and operate. Dual voltage is a useful function for my job. Welding process with this stick welder is not difficult. Just prepare properly welding surfaces, and you' ll get good results.
Review by Jose
Posted on
-
STICKWELD 140 STICK WelderOverall Quality100%I bought STICKWELD 140 to weld in a farm because it is powerful machine and is easy to move due to its ultra portability and small size. It is easily and quickly adjusted device. Now, I can work for longer period of time because it can run hot as a result of increased duty cycle.
Review by Jeff
Posted on
-
STICKWELD 140 STICK WelderOverall Quality100%It is very useful machine to do a lot work in different sites. It suits my needs because its portability allows taking it anywhere I need. What I most value in this welder is its simplicity and easiness in operation. It is worth buying.
Review by Dan
Posted on
-
STICKWELD 140 STICK WelderOverall Quality100%This welder is great for hobby and farm work. It is extremely portable. It is very quiet and takes up little space. The dual voltage is great but you will trip breakers on normal household outlets will on 110v, I use 220v and have not hit the duty rating yet. This welder is great!
Review by Jacob
Posted on
-
STICKWELD 140 STICK WelderOverall Quality100%This truly is a good little welder. The inverter thing sounded good so I ordered the longevity 140 thinking I'll run a long chord from my 230 volt source. but instead I plugged it to my 120 volt source placed it at 90 amps(which is all I need) and started welding my little trailer with no difficulty whatsoever no sticking very smooth. Cant wait tio pay this off and order my plasma arc cutter
Review by Manuel
Posted on
-
STICKWELD 140 STICK WelderOverall Quality100%Good product, performed as spected, make sure you have a good outlet that is not old and loose or it may give you problems like it did to me, fan would come on but nothing else until i tried it on a different outlet.
Review by Ruben
Posted on
-
STICKWELD 140 STICK WelderOverall Quality100%Welder is compact and light weight. .
Review by John
Posted on
-
STICKWELD 140 STICK WelderOverall Quality100%So I got this three years ago, and have been very happy with it. I used a Miller at work, one of the mid-sized cracker box ones that went to 300 amps. On a 220 amp outlet, this will do as good at 140 amps as that one did at 300. I have since used this machine to do a lot of side work, and wherever I have used it it has run well. on a 110 outlet, you can only go to about 90 amps without popping the breaker, unless you have a 30 amp or better breaker, but 90 amps is plenty adequate to do pretty much anything I want with it. I use 1/4" 6011, 7018 rods on it, and sometimes a 7018 ac, which works really well on a 110. this little $175 (on sale) welder has made me probably $5-6k in two years. I couldn't recommend it more.
Review by ben
Posted on
Tig
-
TIGWELD 250EX PART 2-TIG
-
TIGWELD 250EX PART 1-STICK
-
OVERHEAD TIG WELDING TECHNIQUES
-
LONGEVITY TIGWELD 200i - 200 AMP DC TIG STICK WELDER REVIEW AND SETUP
-
Longevity Tigweld 200D-Setup & Review (200 AMP DC Tigwelder)
-
Longevity TIGWeld 200SX Review | TIG Time
-
Lincoln Invertec V205-T Vs. Longevity Tigweld 200EX
-
DiResta The Which Blade
-
HOW TO MAKE A COMPRESSOR MANIFOLD
-
TIGWeld 200sx From Longevity - Unboxing - Setup - Overview
-
TIG WELDING COPPER TIPS AND TRICKS
-
Tig Tungsten Diameters Explained
-
temper plate project video tigweld 200i
-
LONGEVITY TIGWELD 200D SETUP AND REVIEW - 200 AMP DC TIG WELDER
-
MAKING A CUSTOM METAL LAMP SHADE BY WELDING WITH A TIG WELDER - PART 1
-
LONGEVITY TIGWELD 200EX STICK ARC WELDING 316L STAINLESS TEE JOINT - WELDING TIPS
-
HOBART EZ TIG 165I vs LONGEVITY TIGWELD 200SX HEAD TO HEAD MACHINE CONTROLS COMPARISON REVIEW PART 1
-
HOBART EZ TIG 165i VS LONGEVITY 200EX COMPARISON REVIEW
-
ALUMINUM TEE MULTIPASS USING PULSE TIG WELDING - TIPS AND TRICKS
-
ALUMINUM TIG CORNER JOINT FILLET WELDING FINISHING WELDS TECHNIQUE TIPS AND TRICKS
-
TIG PULSE WELDING RATE SETTINGS ON ALUMINUM 6061-T6 USING THE LONGEVITY TIGWELD 200 EX
-
GTAW TIG WELDING ALUMINUM FULL PENETRATION BUTT WELD WELDER TIPS AND TRICKS
-
TIG WELDING CARBON STEEL MULTIPASS FILLET WELDS WITH TIGWELD 200 EX
-
CK WORLDWIDE CLEAR GAS SAVER PYREX CUP LENSE ON LONGEVITY 200SX WP-26 TIG TORCH SETUP REVIEW PART 1
-
TIGWELD 200 DX
-
MICROTIG 200 DIGITAL
-
TIGWELD 200 SX SET-UP
-
TIGWELD 160 SX SET-UP
-
TIGWELD 200 EX SET UP
Mig
-
LONGEVITY SPOOL GUN 140 SETUP AND REVIEW
-
LONGEVITY MIGWELD 200S 200AMP 60% DUTY CYCLE MIG STICK/ARC WELDER SETUP REVIEW
-
LONGEVITY MIGWELD 250 MP - PULSE ON PULSE MIG WELDER REVIEW AND SETUP
-
CUSTOM GAS CYLINDER MOUNTING BRACKET PART 2 of 2
-
INTRO TO MIG WELDING TIPS AND TRICKS
-
LONGEVITY MIGWELD 200S 200AMP 60% DUTY CYCLE MIG STICK/ARC WELDER SETUP REVIEW
-
MIG WELDING WITH AND WITHOUT GAS
-
Longevity Force Cut 40D, Migweld 140, M1 Cart Tool Review -EricTheCarGuy
-
LONGEVITY MIGWELD 250 MP - PULSE ON PULSE MIG WELDER REVIEW AND SETUP
-
MIG Welding Basics: Quick & Easy Trailer Ramp Project
-
MIGWELD 200 S STICK DEMO
-
ARCMATE 160D SET-UP
-
MIGWELD 250p
-
MIGWELD 140 VS. HOBART HANDLER PART 2
-
MIGWELD 140 VS. HOBART HANDLER PART 1
Stick
-
LONGEVITY Stickweld 140 140AMP Dual Voltage Portable Stick Welder by Longevity
-
LONGEVITY STICKWELD 140 STL - 140 AMP STICK - TIG WELDER SETUP AND REVIEW
-
LONGEVITY STICKWELD 140 STL - 140 AMP STICK - TIG WELDER SETUP AND REVIEW
-
STICK WELDING BASICS - ARC WELDING EXPLAINED
-
316L STAINLESS STEEL STICK CARBON STEEL OVERLAY WITH STICK ARC WELDER
-
STICK WELDING 316L STAINLESS STEEL WELDING OUTSIDE CORNER JOINT USING LONGEVITY WELDER
-
Stick Welding Cast Iron to Steel [Custom Clamp Mini-Build]
-
Stick Electrode Caddy TIG Project (Scrap Metal Mini-Build)
-
STICKWELD 250 SET-UP
-
STICKWELD 140 SET UP
Multiprocess
-
MOTORIZED WELDING TURNTABLE - PART 5
-
WELDING TURNTABLE PART 4
-
Longevity Innovator 255i Setup and Review Part 4 Plasma Cutting
-
Longevity Innovator 255i Setup and Review Part 4 Plasma Cutting
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 3 - AC ALUMINUM TIG WELDING
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 2 - TIG WELDING
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY PROMTS 200i MIG TIG STICK 3 IN 1 WELDER SETUP TIPS TRICKS REVIEW
-
LONGEVITY PROMTS 252i 250 AMP MIG - TIG - STICK WELDER 3 in 1 SETUP and REVIEW
-
LONGEVITY PROMTS 200i MIG TIG STICK 3 IN 1 WELDER SETUP TIPS TRICKS REVIEW
-
STICK WELDING WITH THE LONGEVITY MIGWELD 250 MP PULSE ON PULSE MIG AND STICK WELDER
-
PLASMA CUTTING BASICS TIPS AND TRICKS
-
STICK WELDING BASICS- ARC WELDING EXPLAINED
-
WELDMAX 185i 3 in 1 PLASMA, TIG, STICK SETUP REVIEW TIPS AND TRICKS
-
INNOVATOR 255i SETUP REVIEW AND DEMO TIPS AND TRICKS
-
WELDMAX 164i SET-UP
-
PROMTS 200 SET-UP
Plasma
-
FORCECUT 62i Setup and Review
-
LONGEVITY FORCECUT 62i VS THERMAL DYNAMICS CUTMASTER 52 REVIEW PART 2
-
LONGEVITY FORCECUT 62i PLASMA CUTTER SETUP AND REVIEW
-
FORCECUT 40D
-
Longevity ForceCut 42i Review | TIG Time
-
FORCECUT 40D SET-UP
-
FORCECUT 80i PRACTICAL USE
-
FORCECUT 80i SET-UP
-
FORCECUT 40i SET-UP
-
FORCECUT 42i PLASMA CUTTING IN 110V
-
MIGWELD 140 SETUP
-
FORCECUT 42i
Consumables
General
No Videos
Setup
-
TIGWELD 250EX PART 2-TIG
-
TIGWELD 250EX PART 1-STICK
-
OVERHEAD TIG WELDING TECHNIQUES
-
LONGEVITY TIGWELD 200i - 200 AMP DC TIG STICK WELDER REVIEW AND SETUP
-
Longevity Tigweld 200D-Setup & Review (200 AMP DC Tigwelder)
-
Longevity TIGWeld 200SX Review | TIG Time
-
Lincoln Invertec V205-T Vs. Longevity Tigweld 200EX
-
DiResta The Which Blade
-
HOW TO MAKE A COMPRESSOR MANIFOLD
-
TIGWeld 200sx From Longevity - Unboxing - Setup - Overview
-
TIG WELDING COPPER TIPS AND TRICKS
-
Tig Tungsten Diameters Explained
-
temper plate project video tigweld 200i
-
LONGEVITY TIGWELD 200D SETUP AND REVIEW - 200 AMP DC TIG WELDER
-
MAKING A CUSTOM METAL LAMP SHADE BY WELDING WITH A TIG WELDER - PART 1
-
LONGEVITY TIGWELD 200EX STICK ARC WELDING 316L STAINLESS TEE JOINT - WELDING TIPS
-
HOBART EZ TIG 165i VS LONGEVITY 200EX COMPARISON REVIEW
-
ALUMINUM TEE MULTIPASS USING PULSE TIG WELDING - TIPS AND TRICKS
-
ALUMINUM TIG CORNER JOINT FILLET WELDING FINISHING WELDS TECHNIQUE TIPS AND TRICKS
-
TIG PULSE WELDING RATE SETTINGS ON ALUMINUM 6061-T6 USING THE LONGEVITY TIGWELD 200 EX
-
GTAW TIG WELDING ALUMINUM FULL PENETRATION BUTT WELD WELDER TIPS AND TRICKS
-
TIG WELDING CARBON STEEL MULTIPASS FILLET WELDS WITH TIGWELD 200 EX
-
CK WORLDWIDE CLEAR GAS SAVER PYREX CUP LENSE ON LONGEVITY 200SX WP-26 TIG TORCH SETUP REVIEW PART 1
-
MICROTIG 200 DIGITAL
-
TIGWELD 200 SX SET-UP
-
TIGWELD 160 SX SET-UP
-
TIGWELD 200 EX SET UP
- THUNDER-ARC E7018 Welding Electrodes: 1/8"(3.2mm), 11Lb Box Versatile, All-Position ElectrodesSale Price $29.99 Regular Price $34.39
- THUNDER-ARC E6013 Welding Electrodes: 1/8"(3.2mm), 11Lb Box Versatile, All-Position ElectrodesSale Price $29.99 Regular Price $34.57
- THUNDER-ARC E6011 Welding Electrodes: 1/8"(3.2mm), 11Lb Box Versatile, All-Position ElectrodesSale Price $29.99 Regular Price $32.57
- 300 AMP STICK ELECTRODE HOLDER, 50 DINSE (10-Foot) 300 Amp Heavy-Duty Service UseSale Price $69.99 Regular Price $74.99
- GROUND CLAMP, 50 DINSE CONNECTOR (10-Foot) High-Quality Solid Brass Dinse Style CableSale Price $69.99 Regular Price $73.27
-
-
- POWER-VIEW ELITE Welding Helmet Auto-Darkening Adjustable Welding MaskSale Price $129.99 Regular Price $167.99
- STICK WELDING GLOVES, WELDING-ARMOR S06 (Large) Reinforced Leather, Extreme Comfort, Maximum ProtectionSale Price $16.79 Regular Price $22.99
- WELDING-ARMOR JACKET (Large) Protection for Welders and Plasma CuttersSale Price $96.99 Regular Price $105.99
-
STICKWELD 200 STICK Welder 200 Amp 220V STICK Welder with Anti-Stick (6010/6011 Capable)Sale Price $329.99 Regular Price $419.99 -
STICKWELD 250 STICK Welder 250 Amp 220V STICK Welder (6010/6011 Capable)Sale Price $499.99 Regular Price $659.99 -
TIGWELD 200SX TIG/STICK Welder 200 Amp 110V/220V AC/DC TIG/STICK WelderSale Price $849.99 Regular Price $1,019.99 -
TIGWELD 210SX TIG/STICK Welder 200 Amp 110V/220V AC/DC TIG/STICK WelderSale Price $999.99 Regular Price $1,019.99 -
TIGWELD 250EX Pulse TIG/STICK Welder 250 Amp 110V/220V AC/DC Pulse TIG/STICK WelderSale Price $1,749.99 Regular Price $2,159.99 -
TIGWELD 200D TIG/STICK Welder 110V/220V 200 Amp TIG / 180 Amp STICK WelderSale Price $649.99 Regular Price $839.99 -
TIGWELD 210DX TIG/STICK Welder 210 Amp 110V/220V AC/DC TIG/STICK WelderSale Price $1,199.99 Regular Price $1,379.99 -
TIGWELD 280DX Pulse TIG/STICK Welder 280 Amp 110V/220V AC/DC Pulse TIG/STICK WelderSale Price $2,099.99 Regular Price $2,639.99 -
WELDING CART M1 Heavy-Duty, Easily Assembled, Holds Multiple MachinesSale Price $181.99 Regular Price $200.19