Availability: In stock
You have no items to compare.
With the ForceCut® 40D plasma cutter, the Pilot Arc system automatically senses loss of voltage, andre-ignites the Pilot Arc allowing for the torch head to maintain an arc when cutting.
The ForceCut® 40D starts the arc by creating an internalspark to ignite the plasma arc. By using air pressure tomove the electrode against the nozzle, the ForceCut® 40D creates the arc without any need for high frequency.
Protection to extend the life of consumables and the welding torch is enhanced by our post flow circuit that provides shielding gas after you release the trigger.
LONGEVITY offers easy accessibility by using front mounted regulators and Gauge on the ForceCut® 40D. An easy pull and turn to adjust the air pressure and a push to lock it in is all it takes, no fumbling around to the back to adjust settings. You will be able to see the pressure on the unit.
The ForceCut 40D uses digital meters to allow customers to adjust the unit to any amperage quickly, accurately,and easily.
This Plasma Cutter weighs in at only 25lbs and can run off 110 or 220 volt making it the ultimate in portability! The ForceCut40D is capable of being hooked up to most portable compressors and generators. The ForceCut® 40Dis lightweight, powerful and more reliable than other units on the market using out-of-date technology.
LONGEVITY has included thermal overload protection which informs the user when the duty cycle has been exceeded shutting down the unit in a safe matter until it has been cooled to adequate temperatures to proceed cutting.
110v/220v 50/60hz 1 phase
3/4” @ 3” per min
60% at 40 amps
Pilot Arc Technology
W: 6”x H: 12”x D:15”
1 year Warranty, parts and labor. Please take a look at our terms and policy page for detailed warranty information on this unit.
LONGEVITY 40 AMP Plasma Cutter with Full Pilot Arc.
• 10ft. S-45 Plasma Cutting Torch• Ground Clamp• Built In Air/Water Separator• Gas Hose• 3x Piece Tips• 3x Piece Electrodes• 1x Shield Cup
Accessories for this item
Add Your Review
A :<p>No it does not. However, you do not want a plasma with one built in. They are not reliable, leak, and are often weak. Any air compressor outside will work with this machine even if it is a small one. You do not want the chance of a leak inside the plasma.</p>
Only registered users can as question about this product. Please, log in or register
© 2014 longevity-inc.com Longevity Global, Inc. 23591 Foley St, Hayward CA 94545