More Views

MODEL : FORCECUT 62i     PRODUCT # : 880459

product Highlights:


Availability: In stock

Retail Price: $1,979.99

Sale Price: $1,599.99

Optional Additional Warranty:
Additional 1 Year Warranty (Parts and Labor) : $150.00
Additional 2 Year Warranty (Parts and Labor) : $280.00
You will earn 79 Points for buying this product

DOwnload PDF:

Upload images for this product

Have a Question about this Product?
0 Question | 0 Answer
Read all Q&A | Ask a Question
Answer a Question

Recommended Areas Of Use

  • Welding Repair
  • Motorsports/ Automotive
  • Contstruction/HVAC
  • Commercial maintenance
  • Fabrication/machine shops
  • Shipyard/pipeline industry

What’s included

  • LONGEVITY 60AMP IGBT Plasma Cutter with 20ft.Plasma Torch
  • Earth Clamp
  • Consumables: 3 piece tips, 3 piece electrodes 1 shield cup
Compare Products

You have no items to compare.

View Additional Photos

20-60 Amp Cutting Range

The ForceCut® 62i only weighs 53lbs. and runs off 220v 1 phase voltage making this unit a very portable plasma cutter for its power. The ForceCut® 62i offers quality cutting of up to 1 1/4” (30mm) and rough cuts of up to 1 3/8”(35mm)!

Built In Air Filter And Regulator

Built in gas/air filter and regulator provides air filtration of airborne particles to keep the ForceCut 62i cutting clean and efficiently.


Duty Cycle

The ForceCut 62i features an industry competitive duty
cycle of 95%. This duty cycle will allow your machine to run hotter than most brands while you work for longer periods of time.

Thermal Overload Protection

LONGEVITY has included thermal overload protection which informs the user when the duty cycle has been exceeded shutting down the unit in a safe matter until ithas been cooled to adequate temperatures to proceed cutting.

Pilot Arc Technology

With the ForceCut® 62i plasma cutter, the Pilot Arc system automatically senses loss of voltage, auto-ignites the Pilot Arc allowing for the torch head to maintain an arc when cutting.

Blowback Arc Start/ CNC Ready

The ForceCut® 62i starts the arc by creating an internal spark to ignite the plasma arc. By using air pressure to move the electrode against the nozzle, the ForceCut® 62i creates the arc without any need for high frequency. This allows for easier CNC table integration without the worry of interference.

Efficient IGBT Inverter Technology

IGBT technology has taken the welding industry to newlevels. It gives us the ability to offer smaller units that weigh less while increasing efficiency.


220v 50/60Hz 1 phase

Severance Cut

1 3/8" (35mm)


IGBT Inverter Based

Duty Cycle

95% at 60amps

Pilot Arc Technology


Starting Mechanism

Blowback Start


W: 9”x H: 21”x D:17”


53 lbs










Product Literature :
View FileFORCECUT 62i MANUAL 949.44 KB
View FileForceCut 62i Specification Sheet 439.79 KB


Three year Warranty, parts and labor. Please take a look at our terms and policy page for detailed warranty information on this unit.



FORCECUT® 40D          







Dual-Voltage Yes Yes with PFC technology No No
Arc Start HF Blowback Blowback HF
Inverter Type Mosfet

Infineon IGBT

Infineon IGBT Infineon IGBT
Pilot Arc Yes Yes Yes Yes
Duty Cycle  60% @ 40 A 40% @ 40 A 95% @ 60 A 60% @ 80 A
Plasma Output (Amps) 40 A 40 A 60 A 80 A
Recommended Maximum Cut Thickness 3" Per minute @ 3/4" Steel (Severance Cut)
7" Per minute @ 1/2" Thick Steel
17" Per minute @ 3/8" Thick Steel
3" Per minute @ 1" Steel (Severance Cut)
7" Per minute @ 3/4" Thick Steel
17" Per minute @ 1/2" Thick Steel
3" Per minute @ 1.25" Steel (Severance Cut)
7" Per minute @ 1.00" Thick Steel
17" Per minute @ 1/2" Thick Steel
3" Per Minute @ 3/4" Aluminum
3" Per minute @ 1.75" Steel (Severance Cut)
7" Per minute @ 1.25" Thick Steel
17" Per minute @ 3/4" Thick Steel
3" Per Minute @ 3/4" Aluminum
Maximum Severance Cut 3/4" 1" 1 3/8" 1 1/2"
Recommended Generator Power 5000 Watts 6500 Watts 8000 Watts 9000 Watts



•    20ft. PT-60 Plasma Cutting Torch
•    Ground Clamp
•    3x Piece Tips
•    3x Piece Electrodes
•    1 Shield Cup





Accessories for this item

  1. product Highlights:

    S45 Pilot Arc Torch Wheel Spacer...

    Retail Price: $59.36

    Sale Price: $54.59

  2. product Highlights:


    Retail Price: $19.78

    Sale Price: $16.79

  3. product Highlights:

    PT-60 15 kit for the PT-60 Torch this kit is composed of 7 t...

    Retail Price: $187.36

    Sale Price: $173.59

  4. product Highlights:

    Auto Darkening Welding Helmet Adjustable Mask...

    Retail Price: $167.99

    Sale Price: $129.99

    1. product Highlights:

      PTM-60 CNC TORCH...

      Retail Price: $580.57

      Sale Price: $559.99

    2. product Highlights:

      PT-60 30 KIT...

      Retail Price: $303.47

      Sale Price: $279.99

Related Articles
Related Videos

Product Literature
Additional resources
Welding Resources


Three year Warranty, parts and labor. Please take a look at our terms and policy page for detailed warranty information on this unit.

Be the first to write a review

Questions and Answers
There are no entries.